303350
5
Zoom out
Zoom in
Previous page
1/10
Next page
129737
Instructions for Use18
Drying
Drying programme selection clements are fited in
the control panel as well as the indicator light
which is on during the operation of the machine.
Preparing the Laundry for
Drying
x Sort the laundry before drying according to type
of the laundry.
x Do the buttons, zippers, join the strings and pull
out the pockets.
x Very delicate laundry (fine underwear with
laces) should prior to drying be put in a special
sack so that it won't get damaged by buttons,
zippers and pins.
x We recommend loading the drum with items of
different size. Larger pieces of laundry get
tucked during drying. So we recommend you
take them out, shake them and then put them
back.
x When drying large sheets (bed sheets, table
cloths) put 2 to 3 pieces for one load and when
drying delicate smaller items (shirts, blouses) fill
only 5 to 6 pieces for one load (max 2,5 kg).
x Never fill the appliance with drip wet laundry.
x Most clothes nowadays have labels marked
with recommended drying mode.
DRYING
Drying in tumble drier allowed
Wring, hang on rope and dry
No wringing, drip dry
Wring, dry flat
Drying in tumble drier not allowed
Drying at normal temperature
Drying at lower temperature
ON – OFF button
The appliance is switched on and off by pushing
the ON/OFF button.
Signal lamp operation
Signal lamp is on when the appliance is in
operation.
Prior drying
x Switch the dryer on by pressing the ON/OFF
button.
x Before first selection of drying program set the
program selection knob for 1 second to the
position STOP/0.
x Set the program selection button to the desired
drying program. Signal lamp, adjacent to the
selected program is lit (except with the selected
time program).
x Press the "START" button to start the program.
The beginning of operation is signaled by a
beep. The program signal light goes off and
actual humidity level indicator light turns on.
x If you wish to change the selected drying
program after the machine had been put in
operation, set the program selection button
back to the position STOP/0 for 1 second, and
after that you may select any desired drying
program, and start it by pressing the START
button. In case this procedure is not performed,
the machine will continue executing the
originally selected program, notwithstanding the
position of the program selector.
x If the preceding program has been completed
(indicator light END and ANTI-CREASE are lit),
you may select a new program and start it with
the START button. It is not necessary to set the
program selection button to the STOP/0
position.
Drying program selection button
The appropriate program is selected by operating
the program selector switch, which may be turned
in either direction. There is a basic choice of three
drying groups:
9 12 14 13
10 11
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje wt 741 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje wt 741 in the language / languages: English as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info