728377
61
Zoom out
Zoom in
Previous page
1/76
Next page
679937
61
Problem/
error
Indication on the display unit and
problem description
What to do?
Unevenly distributed laundry
When the washing programme is
complete, the symbol will remain lit
on the display unit.
Manually distribute the laundry and run the
spinning programme.
See additional description under
TROUBLESHOOTING TABLE.
cln System warning to run the Steril tub
(Self-cleaning programme)
After the washing programme is
complete, the signs »cln« and »End«
will alternate on the display unit.
We recommend running the Steril tub (Self-
cleaning programme).
»PF« Power supply failure warning (»PF«/
Power Failure)
Washing process was interrupted due to
power supply failure.
To restart, press the (3) START/PAUSE
button.
Unresponsive display unit and all
buttons
Manually (physically) stop the programme by
pressing the button (1) ON/OFF/RESET and
hold it for more than 3 seconds.
Unplug the power cord from the outlet; then,
plug the power cord back into the outlet and
switch on the washing machine.
If the error reoccurs, call a service technician.
Washing machine standing by,
ready to resume the washing
programme
The time remaining until programme
completion is alternately lit and off on
the display unit .
To resume the washing program, press
the button (3) START/PAUSE, or manually
(physically) stop the programme and press
the button (1) ON/OFF/RESET and hold it for
more than 3 seconds.
Preparation for unlocking the door
Signal lights will flash on the display
unit.
Wait until the process is completed. If no error
is indicated after the process, then a new
programme can be started.
Water has to be drained. Wait for the door to
unlock.
Unevenly distributed laundry or lumps of laundry in the washing machine drum can cause problems
such as vibration and noisy operation. The washing machine detects such problems and the UKS*
(*stability control system) will be activated.
Smaller loads (e.g. one towel, one sweater, one bathrobe etc.) or clothes made of materials with
special geometrical properties are virtually impossible to distribute evenly across the washing
machine drum (slippers, large items etc.). This results in several attempts to redistribute the laundry,
which in turn leads to longer programme duration. In extreme cases of unfavourable conditions, the
programme can be completed without the spinning cycle.
The UKS* (*stability control system) allows stable operation and a longer washing machine useful
life.
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje WS967LN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje WS967LN in the language / languages: English as an attachment in your email.

The manual is 16,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info