512867
17
Zoom out
Zoom in
Previous page
1/32
Next page
141576
it had been interrupted.
Permanent suspension - change of program
By turning the program selector to the position “0” the program
is permanently suspended. Consequently you may select a new
program
(see Program selection).
Failures
Program is suspended in case a failure occurs. This is
signalled by the relevant reading on the display and a sound
signal (see cf. Troubleshooting).
Power failure
At electric cutout the program is interrupted, however, after the
power supply has been re-established, the program operation
automatically proceeds.
If a power failure occurs when the drum is still full of
water, be careful not to open the door before you pump
the water out.
After certain time you may open the door if the water level in the
drum is low enough, otherwise you must st empty the water
(use additional program Pumping water out
or Spin .
MA (models with the door opening by pressing the G knob
feature the function which enables you to open the door of
the appliance during power failure using special lever, located
adjacent to the lter.
Setting the time of day
- Press MENU (B) and QUICK knobs (D), and turn the program
selector (A) to the rst clockwise program. Display reads
CLOCK and =00:00 (hh:mm) in the right corner.
- Hours start ashing; push the SELECTION knob (C) to set the
time of day.
- Con rm setting by pushing the MENU knob (B).
- Now minutes start ashing; they are set the same way as
hours.
- Con rm setting by pushing the MENU knob (B).
- Return the program selector back to “0” position. Set time is
automatically saved.
Setting the Clean water sensor
In order for the Clean water sensor
to start working
properly, it must be rst calibrated with water that the washing
machine is connected to. This is performed in the following
Special functions
(certain models only)
Special functions
(certain models only)
17
17


Need help? Post your question in this forum.

Forumrules
1

Forum

gorenje-ws43080

Reset search

  • Gorenje Ws43080 primi vodu i ne mrda, kao da je mrtva Submitted on 28-12-2021 at 20:30

    Reply Report abuse
  • ws43080 gorenje, primi vodu i ne nastavlja da radi, mrtva Submitted on 28-12-2021 at 17:24

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje WS43080 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje WS43080 in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info