313454
12
Zoom out
Zoom in
Previous page
1/24
Next page
141344
selected additional functions (i.e. PUMP STOP) , so they
have to be reactivated.
- End of operation
Flashing START/STOP LED indicates that the program was
completed.
Extract the laundry from the drum and remove any alien
objects from the door gasket.
Leave the door ajar to allow the interior to dry.
Close the water inlet faucet.
Switch the machine off by turning the program selector to
position “0”.
Pull the power lead from the socket and cut the power supply
from the mains.
By the user
Selecting Pump stop function
Program is stopped when it comes to the ‘PUMP STOP’
stage (if this function had been previously selected). Drum door
remains closed all the time. Indicator LED above the ‘Pump
stop’ function starts ashing. Washing procedure is continued by
pressing the START knob (C).
Own (physical) interruption
You may also stop the program by turning the program selector
to the position “0”. If there is water in the drum select one of
additional programs (pumping, spinning) to empty the water and
terminate the program.
Pause knob
By pressing the PAUSE knob (C) program may be suspended
at any time. After certain time you may open the door if there is
no water in the drum, otherwise this is not possible. Program is
continued by pressing the START knob (C).
Failures
Program is suspended in case a failure occurs. Signal LED’s
are ashing (see cf. Troubleshooting).
Power failure
At electric cutout the program is interrupted, however, after the
power supply has been re-established, the program operation
automatically proceeds.
If a power failure occurs when the drum is still full of
water, be careful not to open the door before you pump
the water out.
InterruptionsInterruptions
12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje ws 41101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje ws 41101 in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info