786712
52
Zoom out
Zoom in
Previous page
1/64
Next page
604197
52
Problem/
error
Indication on the display unit and
problem description
What to do?
Water drain system alert.
Symbol will appear.
Alert about reduced water flow in the pumping
stage. Check the following:
is the pump filter clean,
is the discharge hose clogged,
is the drain clogged,
if the discharge hose placed is placed below
the maximum and above the minimum
height (see chapter »INSTALLATION AND
CONNECTION/Connecting and securing the
water discharge hose«).
Unevenly distributed laundry
When the washing programme is
complete, the symbol will remain
lit on the display unit.
Manually distribute the laundry and run the
spinning programme.
See additional description under
TROUBLESHOOTING TABLE.
cln System warning to run the Steril
tub (Self-cleaning programme)
After the washing programme is
complete, the signs »cln« and »End«
will alternate on the display unit.
We recommend running the Steril tub (Self-
cleaning programme).
»PF«Power supply failure warning
(»PF«/Power Failure)
Washing process was interrupted due to power
supply failure.
To restart, press the (3) START/PAUSE button.
Unresponsive display unit and all
buttons
Manually (physically) stop the programme by
pressing the button (1) ON/OFF/RESET and
hold it for more than 3 seconds.
Unplug the power cord from the outlet; then,
plug the power cord back into the outlet and
switch on the washing machine.
If the error reoccurs, call a service technician.
Washing machine standing by,
ready to resume the washing
programme
The time remaining until programme
completion is alternately lit and off
on the display unit .
To resume the washing program, press
the button (3) START/PAUSE, or manually
(physically) stop the programme and press the
button (1) ON/OFF/RESET and hold it for more
than 3 seconds.
Preparation for unlocking the door
Signal lights will flash on the display
unit.
Wait until the process is completed. If no error
is indicated after the process, then a new
programme can be started.
Water has to be drained. Wait for the door to
unlock.
604197en.indd 52604197en.indd 52 20. 02. 2021 08:41:0420. 02. 2021 08:41:04
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje WE62S3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje WE62S3 in the language / languages: English as an attachment in your email.

The manual is 12.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info