728381
56
Zoom out
Zoom in
Previous page
1/76
Next page
801586
56
TROUBLESHOOTING AND ERROR TABLE
Problem/
error
Indication on the display unit and
problem description
What to do?
E0 Incorrect settings
Restart the programme. If the error reoccurs, call
a service technician.
E1 Temperature sensor error.
Inlet water too cold. Repeat the washing
programme.
If the washing machine reports this error again,
call a service technician.
E2 Door lock error.
Make sure the washing machine door is closed.
Unplug the power cord from the outlet; then, plug
the power cord back into the outlet and switch
on the washing machine.
If the error reoccurs, call a service technician.
E3 Water filling error.
Check the following:
is the water inlet valve open,
is the filter on the water supply hose clean,
is the water supply hose deformed (clipped,
clogged etc.),
is the pressure in the water mains between 0.05
and 0.8 MPa (0,5–8 bar).
Then, press the (3) START/PAUSE button to
resume the programme. If the error reoccurs, call
a service technician.
E6 Water heating error Restart the programme. If the error reoccurs, call
a service technician.
E7 Water draining error
Check the following:
is the pump filter clean,
is the discharge hose clogged,
is the drain clogged,
if the discharge hose placed is placed below
the maximum and above the minimum
height (see chapter »INSTALLATION AND
CONNECTION/ Connecting and securing the
water discharge hose«);
then, press the (3) START/PAUSE button again.
If the error reoccurs, call a service technician.
E9 Water detected at the bottom of
the washing machine (Total Aqua
Stop system)
Turn off the appliance and turn it back on.
If the error reoccurs, call a service technician.
E10 Water level sensor error. Unplug the power cord from the outlet; then, plug
the power cord back into the outlet and switch
on the washing machine.
If the error reoccurs, call a service technician.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje WA74S3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje WA74S3 in the language / languages: English as an attachment in your email.

The manual is 14,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info