728381
47
Zoom out
Zoom in
Previous page
1/76
Next page
801586
47
INTERRUPTIONS AND CHANGING
THE PROGRAMME
MANUAL INTERRUPTION
To stop and cancel a washing programme, press the (1) ON/OFF/RESET button and hold it for
more than 3 seconds. Signal lights will flash on the display. At the same time, the washing machine
pumps the water out of the washing machine drum. When the water is pumped out, washing
machine door will be unlocked. If the water in the washing machine is hot, the washing machine will
automatically cool it and pump/drain it out.
PERSONAL SETTINGS
Basic or default settings for each washing programme can also be changed. When you select the
programme and additional functions, you may store such combination by pressing the (3) START/
PAUSE button and holding it for five seconds. S C will appear on the display.
The programme will remain stored until it is changed using the same procedure.
Personal settings can also be reset to factory settings in the user menu.
PERSONAL SETTINGS MENU
Switch on the washing machine by pressing the (1) ON/OFF/RESET button. To open the Personal
settings menu simultaneously press the positions (10) SPIN (SPINNING RATE/DRAIN/PUMP STOP)
and (13) WATER+ (HIGH WATER LEVEL). Indicator lights for ECOCARE, TIMECARE, DOSEAID
and ECOEYE will light up on the display unit. Number 1 will appear on the LED display, indicating
the settings function. Rotate the programme selector knob (2) to the left or to the right to choose
the function to change.
Press on the TEMP. (WASHING TEMPERATURE) position to confirm the desired functions and
relevant settings. Press the position (7) PREWASH to go back one step. If the desired settings are
not selected in 20 seconds, the programme will automatically return to main menu.
Number 1 indicates Acoustic signal volume setting. Acoustic signal volume can be set at four
levels (0 means the sound is off; 1 means that the button sound is activated; 2 means low volume,
and 3 means high volume). Choose the volume level by rotating the programme selector knob (2) to
the left or to the right. The lowest setting means that the acoustic signal is switched off.
Number 2 indicates Water hardness setting. Water hardness can be set at three levels. To select
the water hardness level, rotate the program selector knob (2) to the left or to the right and choose
between soft (2:1), medium (2:2) and hard (2:3) water.
For correct functioning of the (5) DOSEAID function, we recommend setting the correct water
hardness level.
Number 3 indicates reset of Personal programme settings to factory defaults.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje WA74S3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje WA74S3 in the language / languages: English as an attachment in your email.

The manual is 14,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info