512843
14
Zoom out
Zoom in
Previous page
1/32
Next page
276657
Upon switching OFF, all additional pre-selected
functions are deleted; therefore they must be switched-
ON again.
- End of washing program
The end of washing program is signalized by ashing washing
progress LEDs. The message “End” is indicated on the display.
Washing machine door can be opened.
Take the laundry out of the drum and remove any remaining
particles or foreign bodies from the door seal.
Leave the door ajar to let the machine dry.
Close the water inlet tap.
Turn off the washing machine by rotating the program selector
knob (A) to position “0”.
After the end of washing program, power supply should be
turned off by pulling the mains cord plug out of the outlet.
By the user
Selecting PUMP STOP function
If the setting pump stop was selected, the program stops
at the last rinsing cycle and the symbol for pump stop
is
indicated on the display. LED next to the START key is ashing.
The program can be completed by pressing the START (E)
button; in this case, the program will nish with a spinning cycle,
as de ned by the program. Spinning rpm can be decreased by
pressing the (
) key - selection of spinning speed (rpm).
The program can also be changed by rotating the program
selector knob to “0” and choosing either spinning or only
pumping out the water between additional programs or cycles.
Manual cancellation
The program is cancelled if the program selector knob (A) is
rotated to position “0”. If there is water in the machine, select
one of the additional programs (pumping, spinning) to empty the
drum and complete the program.
PAUSE knob
By pressing the PAUSE knob (E) program may be suspended
at any time. After certain time you may open the door if there is
no water in the drum, otherwise this is not possible. Program is
continued by pressing the START knob (E).
• Failures
Program is suspended in case a failure occurs. These are
indicated by the ashing LED-s and sound signal is heard (see
cf. Failures).
Interruptions
14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje WA612 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje WA612 in the language / languages: English as an attachment in your email.

The manual is 4,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info