313451
26
Zoom out
Zoom in
Previous page
1/32
Next page
141315
In case you were not successful in repairing the malfunctions in
spite of the above suggestion chart, call the nearest authorized
service shop.
Repairing the failure arising from inappropriate connections or
use of the appliance is not covered by the guarantee, and the
repair expenses are paid by the customer.
* UKS: universal stability control - this function prevents excessive vibrations during spinning.
26
Failure Possible cause Remedy
Water does not enter
the machine.
Error F3
Disturbed water inlet. Check if:
the water faucet is open,
inlet pipe net lter is clean.
(Push the START button again).
Spinning rpm not
reached in the
selected program
Error F4
rpm sensor disconnected
Motor overload due to too high
water level (manual addition of
water) or too big laundry load
• Motor failure
Turn off the appliance and wait for a
few seconds;
turn the appliance back on and
repeat the washing program.
If the failure is reported again, call a
service technician.
Motor operation
interrupted; or motor
does not operate
Error F5
Failure on motor regulation
(depending on model)
Turn off the appliance and wait for a
few seconds;
turn the appliance back on and
repeat the washing program.
If the failure is reported again, call a
service technician.
Program temperature
not reached
Error F6
• Heater failure
Inlet water too cold
Manual addition of water
Turn off the appliance and wait for a
few seconds;
turn the appliance back on and
repeat the washing program.
If the failure is reported again, call a
service technician.
Weak draining of
water, or no draining
at all.
Error F7
Water outlet is clogged. Check if:
• the lter is clean,
• outlet pipe is not jammed,
• outlet pipe is positioned higher than
1 m.
(Push START knob again).
Machine pumps water;
Error F9
(only on some models)
Machine switched the Aqua-stop
protection system on
Disconnect the machine from mains
power and close water intake. Tilt
the machine carefully forward to let
any water collected at the bottom of
the machine to drain out. Reconnect
the machine and start the program. If
the failure occurs again, call nearest
service.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje wa 75185 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje wa 75185 in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info