313451
19
Zoom out
Zoom in
Previous page
1/32
Next page
141315
low enough, otherwise water must be pumped out rst.
At the next start the program is resumed from the position it had
been interrupted.
If you do not like to continue the program, or you wish to change
the spin speed, press STOP and select one of the offered
possibilities.
By touching the spin speed you open the RPM selection menu.
After you select the speed, press START.
You can also move the program ahead, to one of the following
stages which had been interrupted. The machine will offer the
possibility of selection in regard to which stage the washing
program had been in when it was interrupted.
If you select program selection menu, the display indicates
special programs. Press START after the appropriate selection.
If you select end program, you return to master menu, where
you can again select all settings.
• Power failure
At electric cutout the program is interrupted, however, after the
power supply has been re-established, the program operation
automatically proceeds.
If a power failure occurs when the drum is still full of
water, be careful not to open the door before you pump
the water out.
You may open the door of the appliance during power failure with
using special lever, located adjacent to the lter ( g.).
Errors in operation
Program is suspended in case a major failure or error in
operation occurs. This is signaled by the display reading and a
sound signal (see cf. Troubleshooting).
In the tools menu you may set the clock or change some display
settings.
Clock setting
Clock must be set at the rst connection of the appliance to
the mains, and each time it had been disconnected from the
mains for over a week.
From the master menu select tools/clock setting.
Setting is changed by the use of arrows. Touch the eld with
displayed time to con rm the selection of each digit, and/or
switch from minutes to hours. Con rm selected time by
pressing CONFIRM.
Current time is written in upper right corner.
Special settings
19
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje wa 75185 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje wa 75185 in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info