307759

Gorenje wa 61121 Manual

20
Zoom out
Zoom in
Previous page
1/24
Next page
231737
In case you were not successful in repairing the malfunctions in
spite of the above suggestion chart, call the nearest authorized
service shop.
Repairing the failure arising from inappropriate connections or
use of the appliance is not covered by the guarantee, and the
repair expenses are paid by the customer.
* UKS: universal stability control - this function prevents excessive vibrations during spinning.
20
Failure Possible cause Remedy
Washing time is longer
than usual.
• Low temperature of inlet water.
• Due to unevenly distributed
load, the machine has activated
the UKS*.
• Low mains voltage.
• There has been a failure in the
power supply.
• Washing program time may be up to
60% longer; however, this does not
imply a fault in the machine.
• Washing time is extended by the
power supply down-time.
FAILURE 1
Program temperature
not reached (the
machine reports a
failure - the LEDs
periodically fl ash once)
Temperature sensor disconnected
from the electronic circuit.
• Turn off the appliance and wait for a
few seconds;
• turn the appliance back on and
repeat the washing program.
If the failure is reported again, call a
service technician.
FAILURE 4
Spinning rpm not
reached in the selected
program (the machine
reports a failure - the
LEDs periodically fl ash
four times)
• rpm sensor disconnected
• Motor overload due to too high
water level (manual addition of
water) or too big laundry load
• Motor failure
• Turn off the appliance and wait for a
few seconds;
• turn the appliance back on and
repeat the washing program.
If the failure is reported again, call a
service technician.
FAILURE 5
Motor operation
interrupted; or motor
does not operate (the
machine reports a
failure - the LEDs
periodically fl ash fi ve
times)
Motor overload or motor failure. • Turn off the appliance and wait for a
few seconds;
• turn the appliance back on and
repeat the washing program.
If the failure is reported again, call a
service technician.
FAILURE 6
Program temperature
not reached (the
machine reports a
failure - the LEDs
periodically fl ash six
times)
• Heater failure
• Inlet water too cold
• Manual addition of water
• Turn off the appliance and wait for a
few seconds;
• turn the appliance back on and
repeat the washing program.
If the failure is reported again, call a
service technician.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje wa 61121 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje wa 61121 in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info