307838
21
Zoom out
Zoom in
Previous page
1/28
Next page
Instructions for Use
Washing machine
198886
Thank you for your con dence in purchasing our washing machine, and congratulations on the
excellent choice.
Your new washing machine meets the requirements of modern treatment of laundry. It is rational in
the consumption of energy, water and washing agents.
Our appliances are friendly to the environment. Some of the materials may be recycled, others
deposited or decomposed. To avoid pollution of environment, once your appliance is no longer
useful, take it to your local authorized waste appliance dealer.
The appliance is intended exclusively for use in households. If the appliance is used for
professional purposes, for pro t, or for purposes beyond regular use in a household, or if appliance
is used by a person who is not a consumer, the warranty period equals the shortest warranty period
possible as stipulated by the relevant legislation.
Description of washing machine ..................................3
Cautions ..........................................................................4
Installation and connection ...........................................5
Operation .........................................................................9
Tips for washing and energy saving ..........................16
Cleaning and maintenance ..........................................17
Troubleshooting ...........................................................19
Tables ............................................................................23
2
198886
1. Front panel
2. Detergent dispenser
3. Door
4. Filter lid
5. Adjustable legs
6. Water outlet hose
7. Water inlet hose
8. Mains power cable
Dimensions (w x d x h): 600 mm x 600 mm x 850 mm
Dimensions (w x d x h): 600 mm x 440 mm x 850 mm
Depth with door open: 105 cm / 88 cm (depending on model)
Weight (net): 72 kg / 61 kg (depending on model)
Nominal voltage: 230 V, 50 Hz
Rated power: 2000 W
Max. load: 6 kg / 5,5 kg / 4,5 kg (depending on model)
Power socket: (230 V, 50 Hz, 10 A)
Water pressure: min. 0,05 MPa, max. 0,8 MPa
Fuse: 10 A
3
Description of washing machine
Technical information
(depending on model)
198886
Be sure to remove transport brackets prior rst use of the appliance. Attempted operation of the
blocked machine may result in irreparable damage which is not covered by the manufacturer’s
warranty!
When connecting your washing machine to water supply, be sure to use brand new water inlet
hose and appropriate sealing gaskets (attached).
Do not locate the machine in a room with temperature below 0°C. Parts of the machine may be
damaged if frozen.
Install the washing machine in a perfectly horizontal position, on solid at concrete oor.
Follow the instructions for correct installation and water and mains connections.
Never immerse the end of the drain hose into the draining water.
Prior starting the washing cycle lock the door by pressing them at the designed spot.
Door may not be open during the washing cycle.
Use only detergents and softeners for machine wash. Manufacturer may not assume
responsibility for any damage and eventual discoloring of gaskets and plastic components as a
consequence of incorrect use of bleach and/or coloring agents.
For removal of lime residues use such agents with added anti-corrosion agents. Follow the
manufacturer’s instructions. Finish the lime removal by multiple rinsing to remove completely
eventual acid residues.
Never use detergents containing solvents, since there is a danger of creating toxic gasses which
may damage the machine and result in ignition or explosion.
Upon completion of washing operation close the water faucet.
Before any transport block the machine by inserting at least one transport blocking rod. Prior this
operation disconnect the appliance from the mains power!
Rating plate with basic information is located above the opening of the machine.
The warranty shall not apply to consumables (bulbs), minor discoloration or deviations of color,
increased noise level as a consequence of appliance age, which does not affect appliance
functionality, and aesthetical de ciencies which do not affect appliance functionality or safety.
The appliance is manufactured in compliance with all relevant safety standards; however, it is
recommended that persons with impaired physical, motional, or mental abilities, or persons with
inadequate experience and knowledge, do not use the appliance without due supervision. The
same recommendation applies to minors using the appliance.
Before connecting the appliance read these instructions carefully. Repairing the failure
arising from inappropriate connections or use of the appliance is not covered by the
guarantee.
The symbol on the product or on its packaging indicates that this product may not
be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. For more
detailed information about recycling of this product, please contact your local city
of ce, your household waste disposal service or the shop where you purchased the
product.
4
Cautions
198886
In removing the wrapping be careful not to damage the
appliance with a sharp object.
Before connecting the appliance, let it warm up to room
temperature (wait for two hours).
Our appliances are packed in environmentally friendly
materials which may be recycled, deposited or decomposed
without any threat to the environment.
To this end all wrappings are marked accordingly.
Move the pipes.
Loosen screws A at the rear of the machine (Fig. 1).
Remove the brackets B (Fig. 1) and slide them into the groove
on the blocking rod (Fig. 2) - the right one should be turned
around.
Use the brackets to rotate blocking rods for 90° and pull them
out.
Close the openings with attached plastic pegs.
Save transport brackets for eventual later use.
Be sure to remove the transport brackets prior rst
use, otherwise the appliance may be permanently
damaged. In such cases the warranty conditions are
void.
Fig. 1 Fig. 2
Put the appliance in horizontal position by turning the
adjustable legs. The legs are adjustable up to +/- 1 cm.
After the adjustment tighten the nuts rmly (A) - towards
the bottom of the machine!
Vibrations, moving of the appliance and loud operation
due to incorrect setting of the adjustable feet shall not
be covered by this warranty.
The appliance should be placed on a surface with
concrete base; the surface should be dry and clean in
order to prevent slipping. The adjustable feet should
also be cleaned before installation.
Package removalPackage removal
Removal of transport
brackets
Removal of transport
brackets
Leveling the applianceLeveling the appliance
5
Installation and connection
198886
If you have a tumble dryer of the same dimensions, you can
place it on top of the washing machine.
To ensure correct operation of the appliance, water
pressure inlet must be between 0,05 and 0,8 MPa.
Minimum water pressure can be established by
measuring the quantity of poured out water. 3 litres of
water must be poured out from completely opened tap
in 15 seconds.
Take the water inlet hose from the drum and attach the inlet
hose angle extension (1) to the washing machine by screwing
it onto the provided thread (certain models only).
Insert the gasket with a lter net into the straight inlet hose
attachment nut (2) and screw the nut onto the water tap. (With
some models, the gasket with lter net is already tted and
any additional tting into the nut on the straight attachment is
not required).
In case of hot and cold water connection, connect one hose to
cold and other to hot water faucet as marked at the rear of the
appliance (letters C and H) (C - cold; H - hot)
The inlet hose should be tightened manually, rmly
enough to prevent any leaks. After tightening the hose,
check for any leaks.
Use of pliers, wrenches, or other similar tools is not
allowed when installing the hose, as these tools can
damage the nut thread.
Partial Aqua-stop (water stop system)
In case of damage on the interior pipe, leaking is prevented by
automatic closing system which stops water inlet to the machine.
In such cases display A turns red.
Inlet pipe must be replaced.
Complete Aqua-stop (certain models only)
In case of damage on the interior pipe, leaking is prevented by
automatic closing system which stops water inlet to the machine.
Security system also detects whether there is any water leakage
within the interior of the machine. In such cases washing is
suspended, machine switches on the pump and signals error.
Water inlet connectionWater inlet connection
6
198886
Do not immerse the Aqua-stop system inlet pipe into
the water, because it contains the electric valve!
Fix the outlet hose to run into the sink or the bathtub, or
connect it directly to the wall drain outlet (diameter min. 4 cm).
Wall drain must be installed properly and must enable
occasional cleaning.
Fasten the outlet hose support with a piece of rope led through
the hose elbow, to prevent the hose from slipping to the oor.
The end of outlet hose should be placed between minimum 60
cm and maximum 100 cm above the oor level.
Plug the mains power cable to the wall mains socket.
Required voltage and other information are written on the
rating plate above the door opening of the machine.
The wall socket must be accessible at all times and
must be equipped with an earth lead (in accordance
with the local safety regulations).
The permanent connection must be tted by an
authorized personnel only.
Damaged mains power cable may be replaced only by
the producer or his authorized personnel.
Never plug the appliance into the electric shaver socket
or hair dryer socket.
Water outlet connectionWater outlet connection
Connect the appliance to
the mains supply
Connect the appliance to
the mains supply
7
198886
This appliance must be earthed!
Connect the appliance with the cable and plug to a suitable 13
amp socket which is properly earthed.
Required nominal voltage and frequency are indicated on the
rating plate.
The connection to the mains supply and earthing have to be
made according to current standards and regulations. The
appliance resists temporary voltage tolerance up to -15 to +10 %.
If the tted plug is not suitable for your socket outlet, then it
should be cut off and disposed of safely in order to avoid a
possible shock hazard.
A suitable plug of 13 amp or 15 amp rating should then be tted
to the cable.
The wires in the mains lead are coloured in accordance with the
following code (see g.).
1. The GREEN AND YELLOW wire must be connected to the
terminal in the plug, which is marked with the letter E or by the
earth, symbol or coloured green or green and yellow.
2. The BLUE wire must be connected to the terminal which is
marked with the letter N or coloured black.
3. The BROWN wire must be connected to the terminal which is
marked with the letter L or coloured red.
8
198886
A - program selector knob
B - key - selection of spinning speed (rpm)
/ stop pump
C - short program
D - higher water level
E - START / PAUSE button
F - delayed start
G - display
Signal LED’s:
- washing program stages
wash + pre-wash
rinse
spin
9
Program selector Basic programs Partial programs
Cotton
Pre-wash
Cotton E
Rinse
Synthetics
Easy iron
Softening
Delicate Pumping water
Wool Spinning
Mix
Operation
198886
Open the door of the machine.
Load the laundry into the drum.
Close the door.
Open the water inlet faucet.
Select the desired program.
Add washing and treatment agents (detergent and softener).
Start the operation by pushing the START knob (E).
- Open the door of the machine.
Door is opened by pulling the handle (lever) on the right hand
side of the door towards you.
- Sort the laundry by the type of fabrics.
Do the buttons and zippers, tie the strings and pull out
the pockets.
Very delicate laundry should be put in a special
protective sack.
It is suggested to load the drum with items of different
sizes.
Pay attention to the labels on the clothes, indicating
the recommending washing mode (see table of
textile treatment symbols on the last page of these
instructions).
- Load the laundry into the drum.
Check that the drum is empty.
- Close the door of the appliance.
- Open the water inlet faucet.
- Push the ON/OFF button and select washing program.
Program is selected by turning the program selector (A) from
the “0” position to the desired washing program. LED next to
the START key starts ashing. Duration of the selected program
is indicated on the display. The program selector (A) may be
turned in both directions, and the appropriate program selected
according to the type of laundry washed and the required
washing temperature (see Program Chart for help). You may
select basic or partial programs.
Select additional functions by pressing their relevant knobs (E).
- Selection of basic programs (
, , , , )
Basic programs represent integral programs containing all
washing stages, including softening and spinning (see Program
Chart). They are selected by turning the program selector (A) to
the appropriate position.
Washing procedureWashing procedure
Washing machine
operation
Washing machine
operation
10
198886
Cotton: whites/colored
Normally stained cotton and ax bed linen and underwear, table
cloth, bathroom towels, top garments, etc.
To wash heavily soiled laundry that will not discolor, use the
program with a prewash
.
If you wish to economize with energy, use the economic program
E 40°C instead of the 60°C program.
Synthetics
Normally stained shirts, blouses and other polyester and
polyamide garments, or a mixture of these fabrics with cotton.
If you wish the laundry not to be excessively creased at the end
of washing, use easy ironing program
.
Delicate
This is a program for delicate fabrics (dresses, skirts, blouses)
and curtains.
Wool
Special, delicate program for washing woolen products indicated
as appropriate for machine washing, as well as for very delicate
products on which hand washing is indicated as appropriate.
Mix
Special program for washing normally stained colored laundry made
from various resistant fabrics at 40°C.
- Selection of additional function ( , , , )
Additional functions alter the basic washing cycle procedure.
Particular function is switched on by pressing the relevant knob.
The selection is con rmed when the LED next to the key lights
up. If certain function is not available for the selected program,
signal LED will not illuminate.
The function is switched off by pressing the same button again
- signal LED goes off.
Select the particular function after the selection of the
basic program, but prior pressing the START button (E).
Display (G)
After setting the basic and partial programs and pressing the
START (E) button, washing time is indicated on the display. After
the end of washing, the display reads END.
During washing, the remaining washing time is indicated in hours
and minutes.
11
198886
Low water temperature, low network voltage, and
smaller loads of laundry may extend the washing time;
the time indicated on the display is constantly adjusted
to account for such conditions.
Delayed start (F)
Press the (F) button; the time “00:00” will be indicated on the
display (G). Each time the button is pressed again, the time on
the display will be increased by one hour (maximum delay is 23
hours). After the time has been selected, the LED over the button
lights up (and remains lit). If no other button is pressed in the
following 5 seconds, program duration is indicated on the display.
The function is activated when the START (E) button is pressed.
Time is decreased by minutes. When the count-down is over, the
washing program starts automatically.
To interrupt or change the delayed start setting, press the
START / PAUSE button (E).
To change the delay time, select a new time by pressing the
(F) button. Press START to resume the count-down. To quickly
interrupt the delayed start, press the (F) button and hold it
for three seconds. Press the START button to resume the
program.
Spinning speed (rpm) / Pump stop
By pressing the (B) button, you can decrease the spinning speed
(in rounds per minute) to “0”. After pressing the button for the
rst time, the optimum rpm setting for the selected program is
indicated. By each subsequent press on the button, the spinning
speed is decreased. The last selection is “pump stop”, which
means that laundry remains soaked in the last rinsing water. Use
this function to prevent creasing when you are not able to take
the laundry out of the washing machine immediately after the
washing cycle is over. This function is particularly appropriate for
synthetics
and delicate laundry . Use of this function is not
recommended with wool
.
Short program (selection with a button)
• energy-saving program
appropriate for washing lightly soiled laundry or smaller
quantities of clothes
reduces washing and rinsing time
reduces water consumption (with some programs).
Higher water level
Improves rinsing, which is particularly important if your skin is
oversensitive to detergents.
For washing heavily soiled laundry.
12
198886
21
Failure Possible cause Remedy
FAILURE 7
Water is poorly pumped
out or not at all (machine
reports failure - the LEDs
periodically ash seven
times).
Water outlet is clogged Check if:
• the lter is clean,
• outlet pipe is not jammed,
• the drain is clogged,
• outlet pipe is positioned higher
than 1m.
Push START again
Laundry is not properly
spun.
No failure is reported.
The machine switched on the
UKS* function. Because of bad
laundry balance, the machine has
automatically reduced spin RPM.
The machine operates normally.
Wash large and small pieces of
laundry together.
Greasy wads appear on
the laundry.
Too little detergent (laundry was
very greasy).
Wash the laundry again.
Add more detergent for such soiled
laundry, or use liquid detergent.
Laundry is stained after
washing.
You used liquid detergent or
detergent for colored laundry
which does not contain whitener.
Use the detergent containing
whitener.
White powdery residues
on the laundry.
It is not the consequence of bad
rinsing, but because of neo-
phosphate detergents containing
non soluble components
(zeolites) for water softening.
Such substances may be
deposited upon the laundry.
Immediately rinse the laundry once
again.
Use liquid detergents which do
not contain zeolites.
Try removing the residues with
the brush.
Detergent residues in the
dispenser.
Low water ow pressure.
Some detergents may stick to the
dispenser rather hard if it is wet.
Clean the inlet pipe lter net.
In case of low water pressure
increase water level.
• Wipe the dispenser prior loading
detergent.
Softener is not completely
rinsed, or water is left in
the dispenser dish.
Sucking cover is not correctly
positioned or is clogged.
Clean the dispenser and rmly x
the cover to its place.
Unpleasant smell in the
washing machine drum.
Remains of fabrics, washing
agent and softener in the lter.
Development of germs
Check whether the lter is clean.
Run the Cotton 95°C program
without any laundry, using a
powder detergent.
Washing time is longer
than usual.
Time indicated on the
display is corrected during
the washing cycle.
Low temperature of inlet water.
Due to unevenly distributed
load, the machine has activated
the UKS*.
Low mains voltage.
There has been a failure in the
power supply.
Washing program time may be up
to 60% longer; however, this does
not imply a fault in the machine.
Washing time is extended by the
power supply down-time.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje wa 60129 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje wa 60129 in the language / languages: English as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info