307688
13
Zoom out
Zoom in
Previous page
1/28
Next page
161478
Push the START button (D). The ON/OFF LED (E) stops
ashing, the machine starts operating after a few seconds. If
the door is not properly closed after starting the operation, the
ON/OFF LED starts ashing again after a few seconds. When
you close the door, the machine initiates the selected program.
In case you would like to alter the washing program after the
initiated washing operation, turn the program selector for one
second to the position 0, followed by the selection of a new
program. Switching the machine off deletes any previously
selected additional functions, so they have to be reactivated.
- End of operation
Flashing START/STOP LED (E) indicates that the program was
completed.
Extract the laundry from the drum and remove any alien
objects from the door gasket.
Leave the door ajar to allow the interior to dry.
Close the water inlet tap.
Switch the machine off by turning the program selector to
position “0”.
Pull the power lead from the socket and cut the power supply
from the mains.
By the user
Own (physical) interruption
You may stop the program by turning the program selector to the
position “0”. If there is water in the drum select one of additional
programs (pumping, spinning) to empty the water and terminate
the program.
PAUSE knob
By pressing the PAUSE knob (D) program may be suspended
at any time. After certain time you may open the door if there is
no water in the drum, otherwise this is not possible. Program is
continued by pressing the START knob (D).
• Failures
Program is suspended in case a failure occurs. Signal LED’s
are ashing and sound signal is heard (see cf. FAILURES).
• Power failure
At electric cutout the program is interrupted, however, after the
power supply has been re-established, the program operation
automatically proceeds.
If a power failure occurs when the drum is still full of
water, be careful not to open the door before you pump
the water out.
Start the operationStart the operation
InterruptionsInterruptions
13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje wa 50140 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje wa 50140 in the language / languages: English as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info