603671
39
Zoom out
Zoom in
Previous page
1/48
Next page
39
TROUBLESHOOTING TABLE
351677
Failure Possible cause What to do...?
The machine does not
work – the display is not
lit.
• Machine is not powered. Check if:
• power in the socket,
• the fuse is OK,
• plug is in the socket.
Water is leaking from the
machine.
• Filter is not tightly screwed
in.
• Inlet pipe is not tightly
screwed to the machine or
to the water faucet.
• Outlet pipe fell to the floor.
• Tighten the filter properly.
• Tighten the inlet pipe.
• Affix the outlet pipe to the drain.
The machine moves
during operation.
• The machine is not properly
levelled.
• Transport brackets are not
removed.
• Level the machine with the
adjustable legs.
• Remove transport brackets.
The machine vibrates
during the spin.
• Unevenly distributed
laundry, especially with very
small quantities (for ex. only
the bathrobe).
• This is normal, the machine will
reduce the RPM if vibrations are
too strong. Wash larger quantity
of laundry.
Excessive foaming during
washing.
• Excessive measure of
detergent.
• Use washing powder according
to the instructions by the
producer and according to
the water hardness and soiled
laundry. Use only detergents for
machine washing.
Laundry is not properly
spun. No failure is
reported.
• The machine switched on
the UKS* function. Because
of bad laundry balance, the
machine has automatically
reduced spin RPM.
• The machine operates normally.
Wash large and small pieces of
laundry together.
Greasy wads appear on
the laundry.
• Too little detergent (laundry
was very greasy).
• Wash the laundry again. Add
more detergent for such soiled
laundry, or use liquid detergent.
Laundry is stained after
washing.
• You used liquid detergent
or detergent for coloured
laundry which does not
contain whitener.
• Unsuitable program has
been selected.
• Use the detergent containing
whitener.
• Use special stain removers.
White powdery residues
on the laundry.
• It is not the consequence of
bad rinsing, but because of
neo-phosphate detergents
containing non soluble
components (zeolites)
for water softening.
Such substances may be
deposited upon the laundry.
• Immediately rinse the laundry
once again.
• Use liquid detergents which do
not contain zeolites.
• Try removing the residues with
the brush
Detergent residues in the
dispenser.
• Low water flow pressure.
Some detergents may stick
to the dispenser rather hard
if it is wet.
• Clean the inlet pipe filter net.
• Wipe the dispenser prior loading
detergent.
Softener is not
completely rinsed,
or water is left in the
dispenser dish.
• Sucking cover is not
correctly positioned or is
clogged.
• Clean the dispenser and firmly
fix the cover to its place.
Unpleasant smell in the
washing machine drum.
• Remains of fabrics, washing
agent and softener in the
filter.
• Development of germs.
• Check whether the filter is clean.
• Run the auto-clean (SterilTub)
program (see chapter: selecting
additional functions).
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje W843 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje W843 in the language / languages: English as an attachment in your email.

The manual is 6,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gorenje W843

Gorenje W843 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info