729291
21
Zoom out
Zoom in
Previous page
1/54
Next page
21
FITTING TUBE AND ACCESSORIES
- Extend the tube to the desired length by
pressing on button.
- Insert a flexible hose into a tube.
- Fit a nozzle to tube:
- Floor brush is intended for cleaning
bare floor and floor coverings.
- Crevice/furniture nozzle is for cleaning
corners and between cushions.
According to the mark rotate the nozzle
to brush position to clean curtain or
dust on the decorating surfaces.
- Turbo brush is appropriate for cleaning
smooth and bare floor (couch, sofa,
carpeting).
To achieve the best cleaning performance
on carpets, we strongly recommend You to
adjust Your vacuum cleaner to maximum
power when using turbo brush.
Warning: When using additional XTRA long &
flexible nozzle, Your vacuum cleaner must be
set to medium power level. This way you will
avoid excessive overheating of the engine and
accordingly prolong the life of Your vacuum
cleaner.
Instruction for use
Before using the appliance, unwind a
sufficient length of cord and insert the plug
into the power supply.
Press the On/Off button to switch the unit
on. To stop it press the On/Off button again.
You can adjust the air flow using the air flow
regulator on the flexible hose:
- decrease power for cleaning curtains,
books, furniture, etc.
- increase power for cleaning bare floor.
To rewind the cord, press the rewind button and
guide the cord with hand to ensure that it does
not whip causing damage.
Maintenance
1. Changing of the dust bag
Always operate the cleaner with dust bag
installed.
If you forget to attach the dust bag or attach
it in the wrong manner, the dust cover may
not close completely.
1. After removing the flexible tube, open the
front cover.
2. Rotate the support of the bag to the correct
position.
3. Remove the dust bag.
4. Replace the paper bag when it is full of dirty
and put in a new one.
5. Close the cover by passing down unitil it is
locked.
2. Cleaning filter
1. Open the cover for HEPA filter.
2. When open the cover for HEPA filter, use
your two fingers pulling ouch for HEPA,
then pulling HEPA up.
3. Take the HEPA out and change a clean
one.
4. Close the cover for HEPA filter.
Care and cleaning
Switch off the appliance and pull out the plug
from the power supply.
Clean the outside of the appliance with a soft
cloth with mild detergent. Harsh or abrasive
detergent will damage the outside surface.
Never immerse the appliance or cord into water
and other liquids.
CAUTION:
When the dust bin full indicator reaches the
middle of the window, clean the dust bin.
Never use the appliance without filters.
Do not use a washing machine to rinse filters. Do
not use a hair drier to dry them.
Storage
Parking system serves for parking suction
tube/floor nozzle during short-term interruptions.
For this purpose, please insert the holder of the
floor nozzle into parking rail of the device.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje VCED13HB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje VCED13HB in the language / languages: English, Polish as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info