729290
20
Zoom out
Zoom in
Previous page
1/54
Next page
20
Never use your vacuum cleaner for
vacuuming the building material (such as
fine sand, lime, cement dust etc.). Absorbed
building material can damage your
appliance.
When you are using the vacuum cleaner
together for several hours, pull the
connecting cable to the end.
Noise level: Lc < 84 dB(A)
CAUTION: Never use the vacuum cleaner
without the filters.
Vacuum cleaner use only for home and in the
inner rooms!
Connection to the mains
supply
Check, please, whether the voltage stated on the
data plate comply with the data of your house
mains supply.
Supply cord
If the supply cord is damaged, it must be
replaced with the suitable cord, or a set for
coiling the cable, which you can get in the
nearest Gorenje’s service outlet.
If the mains cord is damaged, you must have it
replaced by Gorenje, a service centre authorised
by Gorenje or similarly qualified persons in order
to avoid a hazard.
Data on compliance with
european standards
Test for this type of appliance confirmed that it
complies with the following European directives:
2006/95/EEC Low voltage
93/68/EEC CE Marking
2004/108/EEC Directive on Electromagnetic
Compatibility – EMC
This appliance is marked according to the
European directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE).
This guideline is the frame of a European-
wide validity of return and recycling on Waste
Electrical and Electronic Equipment.
Elimination of the appliances
and environment
If one day you decide to change your appliance,
or you just do not need it any more, think about
the environmental protection.
Vacuum cleaner assembling
Always remove the plug from the power supply
before fitting or removing accessories. Before
putting the appliance into service, please check if
all filters are inserted correctly.
ASSEMBLY OF THE SUCTION HOSE
Insert the flexible suction hose into the
connection opening at the top of the housing
until you can feel it lock.
HOSE REMOVING
To remove flexible hose from the vacuum
cleaner, press the buttons situated on the flexible
hose base, then pull to remove it from the
attachment point.
ROLLING THE CABLE OUT AND UP
Pull out the cable to such a length that easy
working is ensured. Now connect the appliance
to the main supply. Press the switch to activate
the automatic rewinder and hold on the mains
plug for safety reason.
FITTING TUBE AND ACCESSORIES
Extend the tube to the desired length by
pressing on button.
Insert a flexible hose into a telescopic tube.
Fit a nozzle to telescopic tube:
- Floor brush is intended for cleaning
bare floor and floor coverings.
- Crevice/furniture nozzle is for cleaning
corners and between cushions.
According to the mark rotate the nozzle
to brush position to clean curtain or dust
on the decorating surfaces.
- Turbo brush is appropriate for cleaning
smooth and bare floor (couch, sofa,
carpeting).
Instruction for use
Before using the appliance, unwind a
sufficient length of cord and insert the plug
into the power supply.
Press the On/Off button to switch the unit on.
To stop it press the On/Off button again.
You can adjust the air flow using the air flow
regulator on the flexible hose:
- decrease power for cleaning curtains,
books, furniture, etc.
- increase power for cleaning bare floor.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje VCEC03ZRCY at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje VCEC03ZRCY in the language / languages: English, Polish as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info