31
348248
After disconnecting the appliance from the power mains, all
settings will be reset to their default factory values, except for
the contrast setting, acoustic signal setting, anti-crease feature,
and the child lock setting.
SOUND SIGNAL LEVEL
Select the acoustic signal loudness by simultaneously pressing a key (6a) and rotating the
program selector dial (7) clockwise to the initial position.
Each time the key (6a) is pressed, the final loudness level is changed (three levels).
Loudness level is indicated on the display unit. The most recent setting is stored.
SETTING THE CONTRAST LEVEL
To select the contrast level on the display, simultaneously press the (3) key and rotate the
program selector dial (7) clockwise to the initial position.
Each time you press the (3) (–) or (4) (+) key, the level of contrast on the display unit
is changed (9 levels; press (3) to decrease the level, press (4) to increase). Contrast
level is indicated on the display unit. The most recently selected contrast level is stored
automatically after 5 seconds, or after you press the (6b) key.
STANDBY MODE
If no program is selected and started and no other action is taken within five minutes after
turning on the machine, the display will be automatically turned off to save energy. Signal light
on the START/PAUSE key will flash.
The display will turn on again when you rotate the program selector dial or press any button.
If no action is taken after the end of the program, the display will also be turned off after five
minutes. Signal light on the START/PAUSE key will flash.
P o = weighted power in ‘off mode’ [W] 0,02
P I = weighted power in the ‘left on mode’ [W] 0,5
T I = time in ‘left on mode’ [min] 10,0
As a result of low mains voltage or different laundry loads,
drying time can change. This is regularly updated on the
display.
