Manual Gorenje ri 4225 w (page 2 of 12) (English)

354230

Zoom out

Zoom in

1/12

Instructions for Use 3

 Every now and then check if the appliance is

sufficiently ventilated (adequate air

circulation behind the appliance).

 Turn the thermostat knob from higher to

lower setting as soon as possible (depends

on how loaded the appliance is, ambient

temperature...).

 Before loading the appliance with fresh food,

make sure it was cooled to ambient

temperature.

 Ice and frost layer increase energy

consumption, so do clean the appliance as

soon as the layer is 3-5 mm thick.

 If the gasket is damaged or if it turns out that

the sealing is poor, the energy consumption

is substantially higher. To restore efficiency,

replace the gasket.

 The condenser on the rear wall should be

always clean, free of dust or any impurities.

 Always consider instructions stated in

sections Positioning and Energy Saving Tips,

otherwise the energy consumption is

substantially higher.

Important

 This appliance is manufactured in

compliance with relevant safety standards.

However, it is still advisable it is not used

without due supervision by persons with

diminished physical, motoric, or mental

capabilities or persons with inadequate

experience or knowledge. The same

recommendation applies to minors using the

appliance.

 If you have bought this appliance to replace

an old one equipped with a lock that cannot

be opened from inside (lock, bolt), make

sure that the lock is broken. This will make it

impossible for children to lock themselves

inside the appliance and suffocate.

 The appliance must be correctly connected

to the mains supply. (see: Connecting to the

Mains Supply).

 If the food has strange smell or color, throw

it away, because it is very likely that it is

spoiled and therefore dangerous to eat.

 Shear-type hinge (only on some models)

enables automatic door closing at the

opening angle of 20°. On account of strong

springs take care when handling the door.

 The bag with instructions also contains

squares and sponges, intended for

installation of integrated appliance with

shear-type hinge, as well as plastic caps for

covering of hollow spots on walls inside the

appliance.

 Disconnect the appliance from the power

supply before repairing it (only a qualified

technician should repair it), before cleaning

and before replacing the light bulb.

 Do not defrost the appliance with other

electric appliances (as for example with hair

dryer) and never scrape the frost layer with

sharp objects. Use only enclosed tools or

tools recommended by the manufacturer.

 For the sake of environment protection - be

careful not to damage the rear wall of the

appliance (the condenser unit or the tubes -

for example when moving the appliance) or

any part of the refrigerating system inside

the appliance.

 The refrigerating system of the appliance is

filled with refrigerant and oil, so when the

appliance is damaged, handle it with care

and dispose it of in compliance with

environmental protecting precautions. (See

We Care for the Environment).

 If the supply cord is damaged, it must be

replaced by the manufacturer or his service

agent or a qualified person in order to avoid

hazard.

 The rating plate is inside the appliance or

outside on the rear wall.

 Warning! Ventilation slots on the appliance

or a built-in element must always be clean

and unobstructed.

 Warning! Do not use mechanical devices or

tools to defrost the refrigerator, nor any other

methods except for those recommended by

the manufacturer.

 Warning! When installing, cleaning, or

removing the appliance, make sure the

insulation on the refrigeration system parts is

not damaged. Thus you will also prevent

damage to the environment.

 Warning! Do not use electric appliances in

the refrigerator or freezer interior, except for

those expressly allowed by the refrigerator-

freezer manufacturer.

 After the installation, the appliance mains

plug should be accessible

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje ri 4225 w in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gorenje ri 4225 w Manual

Product: