354187
11
Zoom out
Zoom in
Previous page
1/14
Next page
141913
Instructions for Use
27
Changing the Direction of Opening the Door
If you find the direction of opening the door on
your appliance inconvenient, you can change it.
Holes on the opposite side have already been
prepared in the factory and are now plugged.
Unscrew the lower hinge with foot and remove
the door ot the appliance.
Unscrew the other foot and fix it on the place
where previously was the hinge with the foot.
Rotate the fastener having the function of the
upper hinge counter clockwise, take it off and
replace it on the opposite side of the door.
Take off all door corners and interchange them
(instead of the corner with a hole insert the one
without the hole and vice versa).
Put the door on the fastener having the function
of the upper hinge.
Put the fastener with foot of the lower hinge
(with a washer) into the plastic corner with a
hole and fix the lower hinge.
Unscrew the handle and replace it on the
opposite side (not for handles mouinted
horizontally). Some screws are covered with
caps. Take them off before undoing the screws.
Plug the remaining holes with decorative caps.
Check the gasket, it shouldn't be creased and it
should seal well. In case it does not fit perfectly,
pull it out and rotate for 180°.
In certain models it is not possible to replace
the door gasket.
Should the seal not adhere to the casing of the
appliance perfectly, it will have to be heated
from a suitable distance (by means of hair drier,
for example) and lightly stretched to the
required height.
Changing the Direction of Opening the
Door on the Frezing Compartment
Unscrew the blocking element and the hinge of
the frezing compartment and take off the door.
Plug the holes with plastic caps provided.
Turn the door for 180° and replace it on the
opposite side of the frezing compartment. Fix
the hinge and the blocking element of the door
(position of holes already provided).
1 Lower hinge with foot 3 Handle
2 Foot 4 Fastener
5 Frezing compartment 7 Door hinge
6 Blocking element
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje re 1247 baa at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje re 1247 baa in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info