357989
6
Zoom out
Zoom in
Previous page
1/8
Next page
141925
Instructions for Use
15
Approximate Storage Time for Frozen Foods
Food Storage time (in months)
123456789101112
Vegetable +++
Fruit +++
Braed, Pastries +
Milk +
Redy-made meals +
Meat: Beef +++
Veal +++
Pork + + +
Poultry +++
Game + + +
Minced meat +
Smoked sausages +
Fish: lean +
fat +
Offal +
Defrosting Frozen Food
Partially thawed or defrosted foods should be used as soon as
possible. Cold air preserves the food but it does not destroy
microorganisms which rapidly activate after defrosting and
make foods perishable.
Partial defrosting reduces the nutritional value of foods,
especially of fruits, vegetables and ready-made meals.
Ice Making
Recommended thermostat position for ice making is on the
middle setting.
Fill two thirds of the ice tray with cold water or any other liquid
convenient for freezing. Insert the ice tray into the guides or on
the cooling plate.
Time required for the ice to form, largely depends on ambient
temperature, thermostat setting and on how often you open the
door.
It usually takes 2-6 hours (depends on which model of
refrigerator you have). With smaller refrigerators we
recommend you make a stock of ice cubes (store them in a
separate plastic box). The easiest way to empty the ice tray is
to turn the tray around, pour it with cold water and slightly twist
it (bend it).
Changing the Direction of Opening the Door
If you find the direction of opening the door on your appliance
inconvenient, you can change it. Holes on the opposite side
have already been prepared in the factory.
Unscrew the kick-plate and remove it by pushing
downwards.
Unscrew the lower hinge and take off the door together with
the upper hinge washer.
Unscrew the upper hinge fastener and fix it on the opposite
side of the appliance.
Take off, change and replace the door hinge fixture and the
fixture plugs.
Put the door with the upper hinge washer on the upper hinge
fastener.
Fix the lower hinge with washer on the new position.
Replace the cover plate of the lower hinge to the opposite
side of the kick-plate and place it to the appliance.
In case your appliance is equipped with a
handle mounted on the side of the appliance, take it off and
replace it on the other side.
Some screws are covered with caps. Take them off before
undoing the screws.
Check the gasket, it shouldn't be creased and it should seal
well.
Changing the Direction of Opening the Door on the
Frezing compartment
Unscrew the blocking element and the hinge of the Frezing
compartment and take off the door.
Plug the holes with plastic caps provided.
Turn the door for 180° and replace it on the opposite side of
the Frezing compartment. Fix the hinge and the blocking
element of the door (position of holes already provided).
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje r 2746 cla at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje r 2746 cla in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info