728633
10
Zoom out
Zoom in
Previous page
1/13
Next page
EN 9
IMPORTANT PRECAUTION
In case of left side connection (seen from the front)
the hose must be connected by means of a clamp
fixed in the back cover opening. You will find the
fixing clamp in the accessory kit.
CONNECTION TO THE NATURAL GAS
NETWORK
Connection must be made in accordance with
standing local regulations. In case of excessive gas
pressure use pressure regulator.
CONNECTION TO THE LPG NETWORK
Special LPG coupling must be installed at the 1/2"
pipe connection.
1. Connection ending
2. Knee
3. Connection hose (connection from the right)
4. Connection hose (connection from the left)
5. Fixing clamp
6. Back cover of the cooker
IMPORTANT PRECAUTION
In case of left side connection (seen from the front)
the hose must be connected by means of a clamp
fixed in the back cover opening. You will find the
fixing clamp in the accessory kit.
CONNECTION TO THE MAINS POWER
NOTE
The combined cooker is a Class I appliance
according to the electric shock prevention degree
and must be connected to the earthed mains power
installation. The connections must be carried out by
qualified personnel only.
The appliance is fitted with power cord plug for
connection to the mains.
For appliances exceeding 2 kW of power it is
recommended to use extra feed circuit with a 16A
circuit breaker.
Power socket to which the appliance is connected
must be accessible at all times.
Faulty power cord must be immediately replaced
with a new one.
CAUTION
Make sure that the power cord is installed in such
way to avoid touching hot parts of the cooker
(exhaust at the back side, bottom part of the hob).
High temperature could cause damage to the
insulation.
BURNER SETTINGS
MINIMUM OUTPUT ADJUSTMENT
Before starting any adjustments disconnect the
appliance from the mains power supply.
Adjustments must be carried out with the tap at the
"SAVING" position.
The minimum gas output is correctly adjusted when
the inner cone of the flame arrives at the height of 3
to 4 mm.
If this is not the case, first remove the tap knob and
then tighten or loosen the screw C, depending on
whether the flame is to be reduced or increased.
For butane/propane the screw C must be fully
screwed in.
Burner
Small
Medium
Rapid
Input power (kW)
1,0
1,75
2,7
Natural gas G 20 20 mbar
Nozzle diameter
(mm)
0,77
1,01
1,22
Natural gas G 20 13 mbar
Nozzle diameter
(mm)
0,83
1,12
1,37
Propane-butane G 30 30 mbar
Nozzle diameter
(mm)
0,50
0,66
0,83
Nominal flow (gram
/ hour)
72,8
127,3
196,5
CONVERSION TO ANOTHER
TYPE OF GAS
Conversion of cooker to another type of gas can be
performed only by qualified technician.
Adhere to the following procedure:
Change nozzles of all burners.
Adjust or change gas pressure regulator if
installed.
Adjust SAVING power position of hob.
Stick new gas setting label with relevant nozzle
information.
To conduct this operation, make the appropriate
entry in "The warranty card."
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje K5352XF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje K5352XF in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info