728620
18
Zoom out
Zoom in
Previous page
1/48
Next page
18
783293
The sign will appear on the display unit for the rear field to indicate that the two cooking
zones are bridged.
Set the desired cooking power for the bridged cooking zone.
To change the bridged zone's cooking power later on, use the (H) or (I) key for the lower
cooking zone.
Note: The bridged zone does not allow the power boost setting P. Maximum available power
level is 9.
Automatic pan position recognition can be activated at any time for 10 seconds by pressing
the pan recognition key (C3). Automatic pan recognition and automatic cooking zone bridging
are only effective on the cooking zones that are not yet activated. The cooking zone bridge
function can be switched off by setting the power level to "0".
If there is no pan on the cooking hob:
- Switch on the hob. All cooking zones are set to »0«.
- Place the pan on any cooking zone. »0« starts to flash on the cooking zone with the pan.
Cooking zone power can be adjusted by pressing the (H) or (I) keys for the respective
cooking zone. The function automatically bridges the cooking zones depending on the pan
size.
- You may continue with the next pan, using the same procedure.
If the pan is already on the cooking hob:
- Switch on the cooking hob.
- »'0« will flash on the display unit of the cooking zone with the pan on it. Cooking zone power
can be adjusted by pressing the (H) or (I) keys for the respective cooking zone.
- If there are several pans on the cooking zone, the hob will automatically detect all pans and
»0« will flash on display units of all zones on which a pan has been placed.
Cooking zone power can be adjusted by pressing the (H) or (I) keys for the respective cooking
zone; then continue with the next cooking zone.
During the first 10 seconds, automatic pan recognition can also be deactivated in user settings
using the Au parameter. See chapter "User Settings".
The function can be used if the pan is already on the cooking hob or if the cooking hob is
empty.
Pan position recognition is activated
automatically 10 seconds after the appliance is
switched on.
If there is a pan on the hob, the pan
recognition function will recognize its position
and automatically bridge the cooking zones
depending on the size of the pan. Two
adjacent cooking zones can be merged into a
single large cooking zone.
A
B
H
I
I
H
A1
C3
PAN POSITION RECOGNITION WITH AUTOMATIC BRIDGING OF
COOKING ZONES (Only with some models.)
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje IT643SYW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje IT643SYW in the language / languages: English as an attachment in your email.

The manual is 2,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info