728560
34
Zoom out
Zoom in
Previous page
1/40
Next page
CONNECTION
CONNECTION DIAGRAM
Single phase connection (32A)
• Single-phase connection (1 1N, 220–240V~ /50/60Hz):
Voltage between line and neutral conductor is 220–240V~.
Install a jumper between terminals L1 and L2, and between
terminals N1 and N2.
The circuit should be fi tted with a fuse of at least 32A. Power
cord core cross-sectional area should be at least 4mm
2
.
Two phase connection (16A)
• 2 phases, 1 neutral conductor (2 1N, 380–415V~ /50/60Hz):
Voltage between the line and neutral conductor is 220–
240V~.; voltage between lines is 380–415V~. Install a jumper
between the terminals N1 and N2. The circuit should be fi tted
with at least two fuses of at least 16A each. Power cord core
cross-sectional area should be at least 1.5mm
2
.
1
2
3
4
5
L1
N2
PE
PE
220-240V ~ / 50/60Hz
220-240V ~ / 50/60Hz
L2
N1
1
2
3
4
5
L2
L2
L1
PE
PE
380-415V 2N ~ / 50/60Hz
380-415V 2N ~ / 50/60Hz
N2
N1
1
2
1. Check the voltage. Before connecting
the appliance, make sure the voltage
specifi ed on the rating plate conforms to
the voltage of your power mains.
The voltage of your power mains
(220–240V between L and N) should
be checked by an expert using an
appropriate measuring device.
2. Open the cover of the connection
terminal box.
3. Connect the wires according to your type
of appliance.
The jumpers are provided on the
connection terminal.
POWER CORD
(appliance without a power cord)
• The following may be used for connection:
• PVC insulated connection cables type H05 VV-F or H05V2V2-F with yellow-and-green
protective conductor, or other equivalent or superior cables.
• Exterior cable diameter should be at least 8.00 mm.
• Run the power cord through a cord strain relief (clamp) which protects the cable from
being pulled out.
34
718031
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje IT640BCSC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje IT640BCSC in the language / languages: English as an attachment in your email.

The manual is 2,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info