728608
18
Zoom out
Zoom in
Previous page
1/52
Next page
18
718098
you can use the slider to set the power level. The pan recognition key (E1) is lit, but dimmed.
Automatic bridging of the cooking zones is possible across vertically adjacent cooking zones.
Automatic pan position recognition can be activated at any time for 10 seconds by pressing
the pan recognition key (E1). Automatic pan recognition and automatic cooking zone bridging
are only effective on the cooking zones that are not yet activated.
The cooking zone bridge function can be switched off by setting the power level to "0" or by
pressing the relevant deactivation key (O). The function can be used if the pan is already on
the cooking hob or if the cooking hob is empty.
If there is no pan on the cooking hob:
- Switch on the hob. All cooking zones are set to »0«.
- Place the pan on any cooking zone. »0« starts to flash on the cooking zone with the pan.
Now, you can use the slider to set the power level. The function automatically bridges the
cooking zones depending on the pan size.
- You may continue with the next pan, using the same procedure.
- This function allows you to set the power level faster. Simple place the pan on any cooking
zone and the zone will automatically recognize the pan.
If the pan is already on the cooking hob:
- Switch on the cooking hob.
- »'0« will flash on the display unit of the cooking zone with the pan on it. Now, you can use
the slider to set the power level.
- If there are several pans on the cooking zone, the appliance automatically continues with the
selection for the next zone. »0« will flash on the next cooking zone display unit.
If you press the cooking zone selection key, the automatic pan recognition is deactivated and
the appliance switches to manual settings mode.
During the first 10 seconds, automatic recognition can also be
deactivated in user settings using the Aut parameter.
Pan position recognition is activated
automatically 10 seconds after the appliance
is switched on. If there is a pan on the hob,
the pan recognition function will recognize its
position and automatically bridge the cooking
zones depending on the size of the pan. Two
adjacent cooking zones can be merged into
a single large cooking zone. Only the display
unit for the lower cooking zone remains active
and visible, displaying a flashing "0".
The separation line (P) disappears. Now,
E
S E1O
D
O
P
PAN POSITION RECOGNITION WITH AUTOMATIC BRIDGING OF
COOKING ZONES (Only with some models.)
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje IS645BG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje IS645BG in the language / languages: English as an attachment in your email.

The manual is 3,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info