786734
13
Zoom out
Zoom in
Previous page
1/18
Next page
13
Problem
Possible
causes
Action
The
dishes are not clean.
The
spray arms do not rotate.
Remove
the arms and clean them.
Check
that the dishes are not
blocking
the
spray arms.
Ol
d detergent. Detergent is a
perishable
product.
A
void
large packages.
Incorrect
detergent dosage.
Dose
according to water
hardness. Far
to
o much or far too little detergent
results
in
poorer dishwashing results.
Dishwashing
programme too
weak.
Select
a more powerful
programme.
Dishes
loaded incorrectly
.
Do
not cover porcelain with large
bowls
or
the like. Avoid placing very tall
glasses
in the corners of the
baskets.
Glasses
and cups have toppled
over
during
the programme.
Place
dishes to sit steady
.
The
filter is not correctly fitted.
Scre
w the filter firmly into place. See
the
section
Care and cleaning
.
Spots
on stainless steel or silver
.
Some
foodstuf
fs,
such as
mustard,
mayonnaise,
lemon, vinegar
,
salt
and
dressings
, can mark stainless steel
if left
for
too long.
Rinse
of
f
these types of foodstuf
fs
if not
starting
the dishwasher immediatel
y
.
Why
not use the Rinse
programme.
All
stainless steel can cause spots
on
silver
if they come into contact
during
dishwashing
. Aluminium can also
cause
spots
on dishes.
Silver
and stainless steel items
should
not
come into contact during
dishwashing.
Spots
or films on the dishes.
The
water softener is leaking salt.
Check
that the salt compartment lid
is
properly
tightened. Otherwise call
the
service
department.
Incorrect
water softener setting.
See
the section Settings
.
Incorrect
rinse aid dosage setting.
See
the sections Before washing
for the
first
time and Settings
.
Salt
compartment empty
.
T
op
up with salt. See the section
Before
washing
for the first time
.
3-
in-1/ All-in-one detergent is used
and
the
setting
TAB
(3-in-1/ All-in-one
detergent)
is activated.
Inactivate
the setting
TAB
(3-in-1/
All
-in-one detergent) and top up salt
and
rinse
aid.
T
oo
high temperature and/or too
much
detergent
can cause etching on
crystal.
Unfortunatel
y
,
this cannot be
repaired,
only
prevented.
W
ash crystal at a low temperature
and
wit
h a conservative amount of
detergent.
Contact
the detergent manufacture
r
.
Th
e dishes have a sticky white/blue
film.
Rinse
aid dosage setting too high.
Reduce
the amount. See the
sections
Before
washing for the first time
and
Setting
s
.
If
you have very
soft
water
,
you
may
want to dilute the rinse aid
50:50
with
water
.
Spots
left after washing.
Lipstick
and tea can be difficult to
wash
of
f.
Use
a detergent with a bleaching
agent.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje GV55110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje GV55110 in the language / languages: English as an attachment in your email.

The manual is 13.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info