It is recommend that you run a wash cycle with the
dishwasher empty and then remove the plug from the
sock et, turn off the water supply and leave the door of
the appliance slightly open. This will help the door
seals to last longer and prevent odours from forming
within the appliance.
If the appliance must be moved, try to keep it in the
vertical position. If absolutely necessary, it can be
positioned on its back.
One of the factors that cause odours to form in the
dishwasher is food that remains trapped in the seals.
Periodic cleaning with a damp sponge will prevent this
from occurring.
Before cleaning or performing maintenance, always
remove the plug from the socket.
To cle an the exterior a nd rubber parts of the dishwasher,
do not use solvents or abrasive cle aning products.
Only use a cloth with warm so apy water.
To remove spots or stains from the surface of the
interi or, use a cloth da mpened wit h water a n a little
vinegar, o r a cleaning product made specifically for
dishwashers.
Remove the Plug
No Solvents or Abrasive Cleaning
Moving the Appliance
Seals
After every wash, turn off the water supply to the
appliance and leave the door slightly op en so that
moisture and odours are not tra pped inside.
After Every Wash
When not in Use for a LongTime
15
The installation of the pipes
and electrical equipments
should be done by professionals .
Electrical Shock Hazard
Disconnect electrical power before
installin g dishwasher.
Fail ure to do so can result in death or
electrical shock.
The installation position of dishwasher sho uld be near the existing inlet and drain hoses and
power cord.
One side of the cabinet sink should be chosen to facilitate the connection of drain hoses of
the dishwasher.
Installation preparation
Note: please check the accompanying installation accessories(hook for aesthetic panel,screw)
ʎ
