Always use the salt intended for use with dishwasher.
The salt container is located beneath the lower basket and should be filled as explained
in the following:
Attention!
Only use salt specifically designed for the use in dishwashers! Every other type of
salt not speci fically de signed for the use in a dishwasher, espe cially table salt, will
damage the water softener. In case of damages caused by the use of unsuitable
salt the ma nufacturer does not give any warranty nor is liable for any damages caused.
Only fill with salt just before starting one of the comp lete washing programs.
This will prevent any grains of salt or salty water, which ma y have been spilled,
remaining on the bottom of the machine for any period of time, which may cause
corrosion.
5
1. The salt container must only be refilled when the salt warning light in the control panel comes on. Depending on
how well the salt disso lves , the salt warning light may still be on even though the salt container is filled.
If there is no salt warni ng light in the control panel (for some Mode ls),you can estimate when to fill
the salt into the softener by the cycles that the di shwasher has run.
2. If there are spills of the salt, a soak or a rapid program should be run to remove the excessive sa lt.
The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can
leave spots and streaks. It also improves drying by allowing water to roll off the dishes. Your dishwasher is
designed to use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser.
To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely
black. The volume of the ri nse aid container is about 110ml.
Rinse Aid Dispenser
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.
Attention!
Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any o ther substances
(e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance.
Fu ll fill the salt container with water,It is normal for a small amount of water to come out of the salt container.
A After the lower basket has been removed, unscrew and remove the cap from the salt container.
B Pl ace the end of the funnel (supplied) into the hole and introduce about 1.5kg of dishwasher salt.
C
D After fil ling the container , screw the cap tightly back clockwise.
E The salt warning light will stop being after the salt contain er has been filled with salt.
F Immediately after filling the salt into the salt container, a washing program should be started
program Otherwise the filter system, pump or other important parts of the machine may be damaged
by salty water. This is out of warranty.
(We suggest to use a short
).
3. If the machine needs to be dumped for the reasons of transit, repair and so on, please use the bibulous cloth or
analog to blot up the water in the salt container, and screw the cap tightly, afterward, transit or repair the machine.
After transiting or repairing the machine and confirming it in order, load the salt into the softener according to the
process of B. Loading the salt into the Softener . Otherwise, it could be make the big damage to th e machine,
for examp le, rustiness, conk and so on. Such problems are out of the guarantee range.
Ŷ ŷ
