728740
13
Zoom out
Zoom in
Previous page
1/18
Next page
13
Problem
Possible
causes
Action
The dishes are not clean.
The spray arms do not rotate.
Remove the arms and clean them.
Check that the dishes are not blocking
the spray arms.
Old detergent. Detergent is a perishable
product.
A
void large packages.
Incorrect detergent dosage.
Dose according to water hardness. Far
too much or far too little detergent results
in poorer dishwashing results.
Dishwashing programme too weak.
Select a more powerful programme.
Dishes loaded incorrectly
.
Do not cover porcelain with large bowls
or the like. Avoid placing very tall
glasses in the corners of the baskets.
Glasses and cups have toppled over
during the programme.
Place dishes to sit steady
.
The filter is not correctly fitted.
Screw the filter firmly into place. See the
section Care and cleaning
.
Spots on stainless steel or silver
.
Some foodstuf
fs,
such as mustard,
mayonnaise, lemon, vinegar
,
salt and
dressings, can mark stainless steel if left
for too long.
Rinse of
f
these types of foodstuf
fs
if not
starting the dishwasher immediately
.
Why not use the Rinse programme.
All stainless steel can cause spots on
silver if they come into contact during
dishwashing. Aluminium can also cause
spots on dishes.
Silver and stainless steel items should
not come into contact during
dishwashing.
Spots or films on the dishes.
The water softener is leaking salt.
Check that the salt compartment lid is
properly tightened. Otherwise call the
service department.
Incorrect water softener setting.
See the section Settings
.
Incorrect rinse aid dosage setting.
See the sections Before washing for the
first time and Settings
.
Salt compartment empty
.
T
op up with salt. See the section Before
washing for the first time
.
3-in-1/ All-in-one detergent is used and
the setting
TAB
(3-in-1/ All-in-one
detergent) is activated.
Inactivate the setting
TAB
(3-in-1/
All-in-one detergent) and top up salt and
rinse aid.
T
oo high temperature and/or too much
detergent can cause etching on crystal.
Unfortunately
,
this cannot be repaired,
only prevented.
W
ash crystal at a low temperature and
with a conservative amount of detergent.
Contact the detergent manufacturer
.
The dishes have a sticky white/blue film.
Rinse aid dosage setting too high.
Reduce the amount. See the sections
Before washing for the first time and
Settings
.
If
you have very
soft
water
,
you
may want to dilute the rinse aid 50:50
with water
.
Spots left after washing.
Lipstick and tea can be difficult to wash
off.
Use a detergent with a bleaching agent.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje GS54110X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje GS54110X in the language / languages: English as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info