728667
22
Zoom out
Zoom in
Previous page
1/42
Next page
EN 22
SETTINGS
Water hardness
A “PLEASE DESCALE!” message is displayed after the appliance has
been operated for a factory set period of time, calculated on the basis
of the maximum quantity of lime scale which may be contained in the
water used. If necessary, this period of operation can be extended,
making descaling less frequent, by programming the appliance based
on the actual lime content in the water used. Proceed as follows:
1. Remove the “Total Hardness Test” strip (in front of your manual).
Dip it fully in the water for a few seconds. Remove it and wait
30 seconds until its colour changes and a number of red dots are
formed. For example, if there are 3 red dots on the test strip, you
must set the water hardness level to 3.
If you no longer have a water hardness test, you can find the data in
the table below.
2. Press the touch key ‘MENU’ (2) and press the scroll touch keys
(5 and 7) until the menu option “WATER HARDNESS” appears.
Confirm the menu option with the touch key ‘OK’ (9).
3. The display shows the current setting. Press the scroll touch
keys (5 and 7) until the established hardness level is displayed.
Confirm the selection with the touch key ‘OK’. The appliance is now
programmed to provide the descaling warning when necessary,
based on the actual hardness of the water.
Information on the hardness of the water in your area can be obtained
from the local water board. The table below shows the water hardness
setting your machine requires.
German
hardness
French hardness Water hardness
machine
0 - 6 dH 0 - 11 fH 1
7 - 13 dH 12 - 17 fH 2
14 - 20 dH 18 - 36 fH 3
> 21 dH > 37 fH 4
5
279
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje GCC800B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje GCC800B in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info