728583
21
Zoom out
Zoom in
Previous page
1/24
Next page
EN 21
CONVERSION INSTRUCTION
The values are also indicated on the top of the by-pass screws.
The by-pass screws can be reached from the top of the hob when the
knobs are removed (B1and B2).
Please note: be careful when removing the knobs with timer control
function. Inside these knobs there is an interconnection cable; do not
try to remove the cable.
3A. Screw the by-pass screws (3) of all gas taps completely in by using
the flat-blade screwdriver (T2).
3B. Remove the by-pass screws by using the flat-blade screwdriver (T2)
and the nose pliers (T3). Place the new by-pass screws with the
nose pliers and screw the by-pass screws of all gas taps completely
in, by using the flat-blade screwdriver.
3C. Adjust the by-pass screws (3) of all gas taps by using the
flat-blade screwdriver (T2) until a stable flame is established
with a minimal gas flow. Please check if the flame is stable in
cold and hot condition of the burner.
B2
B1
T2+T3
T2+T3
3
Check for gas tightness and operation
When the appliance is connected to the gas supply, use leak test spray
to check the gas tightness:
1. Seal the injector.
2. Open the gas tap.
Attention: press and open tap to override the thermo-electric safety
device and keep it pressed down.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje G641SYB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje G641SYB in the language / languages: English as an attachment in your email.

The manual is 4,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info