728583
14
Zoom out
Zoom in
Previous page
1/24
Next page
EN 14
INSTALLATION INSTRUCTION
Safety regulations
This appliance should only be connected by a registered installer.
Prior to installation, ensure that the local distribution conditions (voltage, frequency,
nature of the gas and gas pressure) and the adjustment of the appliance are
compatible.
This Appliance must be earthed.
The voltage, frequency, power, type of gas and the country for which the appliance
has been designed are shown on the appliance rating plate.
Electrical connection Class I - 220-240 V - 50/60 Hz - max 1 W
The electrical connection must comply with national and local regulations.
The wall plug socket and plug should always be accessible.
If a stationary appliance is not fitted with a supply cord and a plug, or with other
means for disconnection from the supply mains having a contact separation in all
poles that provide full disconnection under overvoltage category III conditions, the
means for disconnection must be incorporated in the fixed wiring in accordance with
the wiring rules. Using an omnipolar switch with a contact separation of at least
3 mm fitted in the supply cable will fulfil this requirement.
The connection cable must hang freely and should not be fed through a drawer.
Gas connection 1/2” ISO 228 / ISO 7-1 / EN 10226-1 (1/2” ISO 228 / 1/2” ISO 228
FR only).
The gas connection must comply with national and local regulations. See appliance
label for technical gas data.
This appliance is not connected to a combustion products evacuation device. It
shall be installed and connected in accordance with current installation regulations.
Particular attention shall be given to the relevant requirements regarding ventilation.
We recommend that the gas hob be connected by means of a fixed pipe. Connection
using a specially designed safety hose is also permitted.
The pipe behind the oven must be made entirely out of metal.
A safety hose may not be bent and must not come into contact with moving parts of
kitchen units.
The gas supply valve must always be placed in an easily accessible position.
The worktop into which the hob is fitted should be flat.
The walls and the worktop surrounding the appliance must be heat resistant up to at
least 85 °C. Even though the appliance itself does not get hot, the heat of a hot pan
could discolour or deform the wall.
Service
Faulty parts may only be replaced by original parts. The manufacturer can only
guarantee that original parts meet safety requirements.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje G641SYB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje G641SYB in the language / languages: English as an attachment in your email.

The manual is 4,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info