786542
18
Zoom out
Zoom in
Previous page
1/24
Next page
EN 18
CONVERSION INSTRUCTION
Converting nozzles
Please note: disconnect the appliance from the power supply. Prevent
damage of the worktop. Lay down parts of the appliance on a protected
base.
For converting to a different type of gas, the nozzles have to be
changed. The values are also marked on the nozzle.
1. Remove pan supports, burner heads, crowns and covers (see
pictures A1 and A2). Pull off the control knobs vertically.
2. Use the socket (T1) or open end spanner (T4) to remove the old
nozzles and place the new nozzles inside the burner cups (see
pictures A1 and A2).
A1
A2
1
2
T1
T4
Converting by-pass screws
Depending on the gas type to which the appliances will be converted,
there are two ways to adjust the by-pass screws.
Please check the conversion table in the column “Modification” if
the by-pass screws have to be screwed completely in (see action 3A
below), replaced by a different by-pass screw (see action 3B below) or
adjusted (see action 3C below).
The values are also indicated on the top of the by-pass screws.
The by-pass screws can be reached from the top of the hob when the
knobs are removed (B1and B2).
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje G641 XUK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje G641 XUK in the language / languages: English as an attachment in your email.

The manual is 4.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info