603430
5
Zoom out
Zoom in
Previous page
1/44
Next page
5
Mounting instructions for refrigerating and freezing appliances are for quali ed technicians only.
Appliance should be mounted and installed in compliance with these instructions, current standards and
regulations. Mounting instructions were prepared for various types/models of appliances, therefore they
may describe some procedures that do not apply to your appliance.
Mounting Dimensions and Required Air Circulation
The rear wall of the appliance is getting warm during the operation of the appliance and water is evapo-
rating from the drain pan on the compressor. You must therefore provide for adequate air circulation on
the rear of the appliance.
At the base of the kitchen unit intended for building in the integrated appliance, there should be at least
200 cm² free space, for adequate air circulation.
On the upper part of the appliance the air is coming out, so try not to cover the opening for the out ow
air.
Changing the Direction of Opening the Door
If you nd the direction of opening the door on your appliance inconvenient, you can change it. Holes on
the opposite side have already been prepared in the factory and are now plugged.
Remove the cover of the upper hinge, unscrew the hinge and take off the door (the door is not xed on
the lower hinge).
Unscrew the upper rail, replace it to the opposite side of the appliance and x it.
Remove the washer from the lower hinge and unscrew (rotate it in clockwise) the fastener on the lower
hinge.
Replace the fastener and the washer in reverse order into the opening of the lower hinge on the op-
posite side of the appliance.
Take off all door corners and interchange them (instead of the corner with a hole insert the one without
the hole and vice versa).
Put the door of the appliance on the lower hinge.
Fix the upper hinge and cover it.
Replace the slide guides to the opposite side of the door.
Plug the remaining holes with decorative caps.
Check the gasket, it shouldn’t be creased and it should seal well. In case it does not t perfectly, pull it
out and rotate for 180°. In certain models it is not possible to replace the door gasket.Should the seal
not adhere to the casing of the appliance perfectly, it will have to be heated from a suitable distance (by
means of hair drier, for example) and lightly stretched to the required height.
Changing the Direction of Opening the Door on the Low Temperature Compartment
Unscrew the blocking element and the hinge of the low temperature compartment and take off the door.
Plug the holes with plastic caps provided.
Shift safety spring to the lower side of the door. (certain models only)
Turn the door for 180° and replace it on the opposite side of the low temperature compartment. Fix the hinge
and the blocking element of the door (position of holes already provided).
I.
II.
Integrated Refrigerating and Freezing Appliances EN
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje FI4061 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje FI4061 in the language / languages: All languages as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gorenje FI4061

Gorenje FI4061 User Manual - German - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info