728455
12
Zoom out
Zoom in
Previous page
1/24
Next page
302967
Required tools: socket spanner nr. 8, screwdriver, torx 25
Caution! After unscrewing of before fi xing hinges, hold the door
to prevent it from falling and damaging.
1. Remove upper hinge cover (keep it for eventual later
use), together with cover on the opposite side of the
upper hinge cover (on the opposite side you will insert
the attached cover during the assembly), and remove the
cover on the opposite side of the upper part of the door.
2. Unscrew upper hinge screws and remove the door from
the bottom hinge.
3. On the bottom side of the door unscrew the swing stopper
screws and remove the stopper (A). Keep this for later
use. Fix the attached stopper with its bearing on the
opposite side of the door.
4. Unscrew the forced door closure system (B) and fi x it to
the opposite side of the door (certain models only).
5. Tilt the appliance backward (max. 35°) to lean to the rear
side of the cabinet. Unscrew the leg support screws
(C) - left and right, and remove the leg support cover
(D). Unscrew and remove, then reciprocally replace
the position of end switch (E) and decorative peg (F)
(for models with forced door closing system). Place this
on the opposite side. Unscrew three screws fi xing the
bottom hinge (keep this for possible later use), and fi x
the attached bottom hinge on the opposite side.
6. Proceed with the assembly procedure in opposite sequence.
Note:
In appliances with the handle along the entire height of the door,
the reverse door swing is not possible.
Version III
12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje F6152AX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje F6152AX in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info