336343
16
Zoom out
Zoom in
Previous page
1/20
Next page
137815
Induction hob may be built into the 30 to 50 mm thick worktops.
Bottom kitchen element must not have a drawer. It must be
tted with a horizontal plate 140 mm away from the worktop
bottom surface. Space between the plate and the hob must be
empty and no objects may be stored or kept there.
Rear side of the kitchen element must also have a 140 mm
high opening along the entire width of the element, and the
front part must have an opening of no less than 6 mm.
Incorporation of the oven under the induction hob is
permissible for all EVP4…, oven types, equipped with a
cooling fan. Prior inserting the oven, it is necessary to remove
the rear kitchen element panel in the area of the oven opening.
Equally, the front part of the element must have an opening of
no less than 6 mm.
Worktop must be placed absolutely horizontal.
Suitably protect the edges of the cut aperture.
By means of the supplied screws 4 fasten the supplied
tightening brackets 4 fasten to the front and the rear side of
the cooking hob and to the prepared aperture.
Connect the cooking hob to the mains power supply (see
instructions for the connection of the cooking hob to mains
power supply).
Insert the hob into the cut aperture.
Press the hob rmly towards the worktop from above.
For screwing down the xing clip it is not allowed to use
screws longer than 6,5 mm.
Installation procedureInstallation procedure
Connections may be carried out by a quali ed technician
only. The earthing protection must comply with the standing
regulations.
Connection terminals are revealed when the connection box
cover is removed.
Prior any attempted connection check that the voltage
indicated on the rating plate is in line with your home power
supply.
The rating plate is located underneath the appliance.
The appliance is manufactured for use with the power supply
voltage AC 230 V.
The electric wiring should be equipped with a circuit breaker
able to isolate the appliance from the mains in all points,
with the distance between terminals of at least 3 mm in
36
Connection to the power supplay
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje eit 2600 p2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje eit 2600 p2 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info