786541
15
Zoom out
Zoom in
Previous page
1/31
Next page
Select the desired timer display by pressing the (D) key (see section Changing the set cooking
time). The set timer will be displayed and the indicator light for the relevant cooking zone will light
up.
Touch the (M) key to set the value to "0" , or press the (N) and (M) key simultaneously
to immediately reset the value to "0" .
Pausing the cooking process with Stop&Go
The Stop&Go function allows you to pause (or suspend) the cooking process, but keep all your settings.
To pause the cooking process, touch the Stop&Go key (C). An indicator light (C1) will light up above
the key. Settings on the displays will start to flash. All settings are frozen, and the cooking zone are
not heated (the heaters are switched off).
All keys except on/off and Stop&Go are inactive. To deactivate the Stop&Go function, touch the
Stop&Go key again. Indicator light (C1) will switch off.
If the Stop&Go function is not switched off, the entire hob will automatically switch off after 10 minutes.
Memory function
The memory function allows restoring the most recently selected settings in 5 seconds after the hob
is switched off. This is convenient when, for example, you accidentally press the on/off key and switch
off the entire hob, or if the cooking hob is switched off automatically due to some spilt liquid.
After switching off with the on/off key, you have 5 seconds to switch the control panel back on, and
further 5 seconds to press the SStop&Go key to restore your settings. During these 5 seconds, the
indicator light above the settings restore key will flash. All settings active before the hob was switched
off will be restored.
Automatic switch off
If the keys are activated for too long during cooking (e.g. due to spilt liquid or an object placed over
the sensor keys), all cooking zones will be switched off after 10 seconds. The symbol will flash on
the display. The object should be removed, or the spilt liquid should be cleaned, from the sensor keys
within 2 minutes; otherwise, the cooking hob will switch off automatically. The most recent settings
can be restored with the memory function using the Stop&Go key
Switching off the cooking zone
To switch off a cooking zone, use the relevant key to set the value to "0" . To quickly switch off
the cooking zone, touch the relevant and keys simultaneously. You will hear a short beep, and
"0" .will be displayed on the display unit.
If the power of all cooking zones is set to "0" ., the cooking zone will switch off automatically after
a few seconds.
Residual heat indicator
As soon as a hot cooking zone or the entire cooking hob is switched off, the following will be displayed:
"H" cooking zone is hot;
How long this will be displayed depends on the power level and on how long a cooking zone was
activated. When the "H" sign disappears, the cooking zone may still be hot in some cases (power
failure, a hot pan left on the cooking zone etc.). Be careful as there is danger of burns! In case of a
power failure while the cooking zones are still hot, the "H" sign will flash on the display. This indicates
that the cooking zone may or may not be hot, depending on the duration of the power failure.
15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje ECT648 BCSC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje ECT648 BCSC in the language / languages: English as an attachment in your email.

The manual is 1.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info