728577
30
Zoom out
Zoom in
Previous page
1/40
Next page
FLUSH-MOUNT INSTALLATION INTO THE WORKTOP
Appliances without faceted edges or decorative frames are suitable for flush mounting.
1. Installing the appliance
The appliance may only be installed into a temperature- and water-resistant countertop,
such as a countertop made of (natural) stone (marble, granite), or solid wood (the edges
along the cut-out have to be sealed). When installing into a countertop made of ceramics,
wood, or glass, a wooden sub-frame should be used. The frame is not supplied with the
appliance.
The appliance may only be installed into a countertop made of other materials after
you have consulted the countertop manufacturer and obtained his express approval.
Internal dimension of the basic unit should be at least equal to the internal cutout for the
appliance. This will allow simple removal of the appliance from the countertop. Attach
sealing tape along the perimeter of the bottom of the glass panel.
First, feed the power cord through the cutout. Place the appliance over the centre of the
cutout.
Connect the appliance to the power mains (see instructions for connecting the appliance).
Before sealing the appliance, test its operation.
Seal the slot between the appliance and the countertop using a silicone sealant. The
silicone sealant used to seal the appliance has to be temperature-resistant (to at least 160
°C). Smooth out the silicone sealant using a suitable tool.
Observe the instructions for use of the selected silicone sealant. Do not switch on the
appliance until the silicone sealant has dried completely.
1
2
1
1. Silicone sealant, 2. Sealing tape
30
696595
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje ECT644SY2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje ECT644SY2 in the language / languages: English as an attachment in your email.

The manual is 2,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info