334142
10
Zoom out
Zoom in
Previous page
1/17
Next page
136356
Immediately after a particular hotplate is switched off, or in
case the complete hob is switched off, the indicator shows the
letter “H” as a warning that the “hotplate is hot”. The period
of this warning signal is calculated in accordance with the
working time and the power setting of the hotplate. When the
warning signal is on do not touch the hotplate or place any
temperature sensitive objects on the relevant hotplate. Danger
of burns!
When the indicator goes off, the hotplate surface is cool
enough to be touched safely.
For safety reasons the remaining heat display is restored in
memory in case of power failure, and when power is regained
continues to ash until the expiry of countdown time from
preceding operation. It is therefore possible that the “H”
indication is still on if the power failure took long time, although
the hotplate is completely cold, but it may also be still hot in
case the power failed for only a short period.
Heat remaining indicator of the warming up hotplate is the
ashing LED signal lamp of the hotplate. This means that the
hotplate is switched off, but still to hot for touching.
The hob is switched off by pressing the main ON/OFF sensor.
The sound signal beeps and all indicators go off, except for
those hotplates which are still hot and display the warning “H”
sign as an indication of the remaining heat. When all hotplates
indicate power level “0”, or when this is the result of the preset
timer operation, the complete hob is switched off after a 10
second lapse, with only the remaining heat warning “H” still
illuminated.
Once the hob is on you have two timer operation alternatives:
1 time countdown without the switch off function
2 setting the timer controlled period of operation for a
particular hotplate
Timer is activated by pressing the timer sensor, the display
indicates “00”. Set the time between 1 and 99 minutes: this
setting may be altered at any time in 1 minute intervals by
touching the (+) or (-) sensor. Constant press of either sensor
changes the setting faster, in 5 minute intervals.
Next touch of the timer sensor sets the time back to ‘’00’’.
28
Remaining heat display
Switching the complete
hob off
Timer function
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje ect 890 e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje ect 890 e in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info