334140
14
Zoom out
Zoom in
Previous page
1/17
Next page
172736
Connections may be carried out by a quali ed technician only. The earthing protection must
comply with the standing regulations.
Connection terminals are revealed when the connection box cover is removed.
Prior any attempted connection check that the voltage indicated on the rating plate is in line with
your home power supply.
The rating plate is located underneath the appliance.
The appliance is manufactured for use with the power supply voltage AC 230 V.
The electric wiring should be equipped with a circuit breaker able to isolate the appliance from
the mains in all points, with the distance between terminals of at least 3 mm in open position.
This may be done by means of fuses, safety switches, etc.
The connection should be selected in accordance with the declared charge capacity of the mains
and the fuse power.
Such appliances are allowed to be mounted on one side next to a high kitchen cabinet, the
height of which may exceed that of the appliance. On the opposite side however, only a kitchen
cabinet of equal height as the appliance is allowed.
Upon the completion of installation, live wires and isolated cables must be adequately protected
against accidental touching.
Distance between the cooktop surface and the cooking hood must be such as indicated in the
instructions for use of the hood.
Kitchen cabinets may not be mounted underneath the built-in ceramic-glass cooktop.
Upon each connection to the power supply the sensors of the
appliance are automatically adjusted to the environment to
ensure their proper function. All displays indicate the sign “-”.
Once the successful adjustment is completed it is signaled with
a beep, all displays are switched off and your cooktop is ready
for use.
During the adjustment procedure the sensors must be free of any
objects, otherwise the adjustment procedure will be interrupted
until such objects are removed from the sensor surface. During
this period the regulation of the cooktop is impossible.
ATTENTION !
Before attempting any repairs on the appliance, disconnect
the power supply. In accordance with the mains voltage the
appliance should be connected in line with the attached diagram.
The earthing wire (PE) must be connected to the terminal
marked with the earthing symbol
.
The connection cable must lead through the relief safety device,
protecting it from accidental pulling out.
Upon the completion of installation switch all the hotplates on for
about 3 minutes to check the proper functioning.
32
Connection to the power supply
Basic adjustment of
sensors to the ambience
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje ect 78 c hl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje ect 78 c hl in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info