335438
15
Zoom out
Zoom in
Previous page
1/18
Next page
Instructions for use, mounting and connection
16
Switching the hotplate on
Once the hotplate is selected and its indicator
flashes ''0'', you have 10 seconds to select the
desired power setting by pressing either sensor
(+) or (-). Indicator will flash the selected setting,
and after 10 second lapse this setting becomes
default.
If no power setting is selected within 10 seconds,
the indicator ''0'' goes off and the hotplate is
switched off.
Automatic cooking mode
When the automatic cooking mode is activated
the hotplate will operate at maximum power for a
limited period of time (depending upon the power
level required for continuation) and then
automatically switch to the reduced power level to
resume cooking (see chart). It may be switched
on in any of the hotplates for all power
settings except for maximum setting 9.
Select the desired hotplate by touching the
hotplate selection sensor. Indicator ''0'' flashes.
Activate the automatic cooking mode by touching
the (+) sensor. In case setting "9" is not changed
within the next ten seconds the automatic cooking
mode is off. It remains active if you press the (-)
sensor and reduce the power setting to any value
between 8 and 1. This means that the maximum
setting "9" must first be reduced by pressing the
(-) sensor, and then it may be increased by
touching the (+) sensor. The indicator displays
letter ''A'' which remains illuminated for the entire
time the automatic cooking mode is on.
Automatic cooking mode will not function on
power setting "9".
If you wish to check the power setting level of
active hotplates during automatic cooking mode,
touch either (+) or (-) sensor. The indicators of all
active hotplates functioning in automatic cooking
mode will display the current power setting.
Power setting Maximum power time
(in sec.)
182
2 164
3 246
4 328
5 410
682
7 164
8 164
Once the time from the above chart expires, the
function is switched off and the indication "A" is
replaced by the originally selected power setting.
Automatic cooking mode may be deactivated at
any time by pressing the (-) sensor or by setting
the cooking power to ''0''.
Blocking the hob operation
This function mode is intended as a protection
against accidental start or change of heating
power by children or pets. The hob may be
blocked by pressing the relevant sensor for about
2 seconds, illuminating the LED signal lamp
above the sensor. The hob may be blocked both
with the hob switched on or off. The functioning of
the complete hob is blocked, except for the main
hob switch and the blocking sensor. In the
blocked mode all hotplates may be switched off
only by pressing the main ON/OFF hob sensor,
while the blocked mode remains active. In case
you try to activate any particular sensor in the
blocked mode, the blocked operation signal lamp
goes on for a few seconds, warning you that this
option is not possible. Blocked operation may be
deactivated at any time by pressing the relevant
sensor, and the signal LED above the sensor will
go off.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje ect 680 e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje ect 680 e in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gorenje ect 680 e

Gorenje ect 680 e User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info