335438
7
Zoom out
Zoom in
Previous page
1/18
Next page
Instructions for use, mounting and connection
8
Control elements
Once the glass ceramic hob is connected to the
mains (including the power failure), the appliance
carries out the harmonization with the conditions
of the exterior in order to provide most efficient
sensor function and render the best control
environment.
After the successful accommodation to the
environment, the indicators show the mark "-" for
a moment which eventually disappear.
The sound signal confirms the appliance is ready
for use.
Do not place any objects upon the sensor surface
during the accommodation period, otherwise you
may provoke error mode. In such cases the
process is interrupted and the appliance signals
error. The hob fails to respond to commands.
The hob is equipped with electronic sensors
which are switched on by touching or pressing the
sensor surface with your fingertip.
Each sensor reaction is confirmed by the beep.
Always take care to touch only one sensor at the
time for a short period of time (approximately 1
second). If more than one sensor is pressed at
the same time the relevant command is not
accepted. If the touch is prolonged it provokes
error mode and the appliance is switched off.
Do not place any objects upon the sensor surface
(error mode) nor any hot dishes which may
damage the sensors. Keep the sensor surface
clean at all times.
Switching the hob on
When the hob is turned off all the hotplates are
off and indicator LED's are off.
To switch the hob on, touch the ON/OFF sensor.
The hob is activated and all power displays
indicate »0« for a period of 10 seconds. Using the
(+) or (-) sensor you may select the desired
cooking power of a particular hotplate (see Power
Regulation).
Next setting of a particular hotplate should be
selected within ten seconds, otherwise the hob
will automatically be switched off and a short
warning beep is heard.
Switching the hotplates on
Once the hob is switched on with the ON/OFF
sensor, within the next ten seconds, while the
indicators are illuminated, you have to switch on a
particular hotplate by touching the (-) or (+)
sensors for the selected hotplate and set the
desired heating power.
If the power setting is not selected within the next
ten seconds, the "0" indicator turns off and the
hotplate will automatically be switched off.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje ect 680 e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje ect 680 e in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gorenje ect 680 e

Gorenje ect 680 e User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info