336339
14
Zoom out
Zoom in
Previous page
1/19
Next page
134422
To avoid any possible hazard, the appliance may be installed by quali ed personnel only.
Panels and furniture lining of the kitchen cabinet receiving the hob must be treated with
temperature resistant adhesives (100°C), otherwise they might be discoloured or deformed
because of inadequate temperature resistance.
The cooking hob is intended for building into the worktop above the kitchen element of 600 mm
width or more.
After the installation of built-in hob make sure that there is free access to the two xing elements
in front.
Suspended kitchen elements above the cooktop must be installed at such distance to provide
enough room for comfortable working process.
The distance between the worktop and the hood must be at least such as indicated in the
instructions for installation of the kitchen hood, but in no case it may be less than 650 mm.
The smallest distance between the edge of the appliance and the adjacent high kitchen cabinet
is 40 mm.
The use of hard wood decorative borders around the worktop behind the appliance is allowed, in
case the minimum distance remains as indicated on the installation illustrations.
Before inserting the appliance into the opening in the kitchen
worktop, the supplied foam gasket must be attached to the lower
side of the glass ceramic (glass) cooking hob (see gure above).
Do not install the appliance without the foam gasket!
The gasket should be attached to the appliance in the
following way:
- Remove the protective lm from the gasket.
- Then, attach the gasket to the lower side of the glass,
approximately 2-3 millimetres from the edge (as shown in the
gure). The gasket must be attached along the entire length of
the glass edge and should not overlap at the corners.
- When installing the gasket, make sure that the glass does not
come into contact with any sharp objects.
NOTE!
On some appliances the gasket is already installed!
Installing the foam
gasket
Installing the foam
gasket
35
Mounting the built-in cooktop
Caution !
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje ect 2600 p2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje ect 2600 p2 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info