728551
17
Zoom out
Zoom in
Previous page
1/28
Next page
17
511235
Changing the cooking time
- Remaining cooking time can be changed at any time during cooking.
- Touch the power-o timer key (D) to select the timer display for the desired cooking
zone. The relevant signal light (K) will fl ash.
- Touch the slider (F) to set a new desired cooking time.
Displaying the remaining cooking time
If several timer settings are activated, remaining cooking time can be displayed by
touching the (G) key.
Timer reset
- Select the desired timer display by pressing the (G) key (see section Changing the set
cooking time). The set timer will be displayed and the dot/point indicating the relevant
cooking zone will light up.
- Use the slider (F) to set the value to "00" or press the left and right edge of the slider
(F) simultaneously to immediately reset the value to "00".
SWITCHING OFF A COOKING ZONE
To switch off a cooking zone, press the
relevant (D) key and set the power level to
zero ("0") by either sliding towards it or by
pressing on the far left side of the slider.
RESIDUAL HEAT INDICATOR
As soon as a hot cooking zone or the entire cooking hob is switched off, the following will
be displayed:
- "H" cooking zone is hot;
- "h" cooking zone is cooling down but it is still warm to touch.
How long this will be displayed depends on the power level and on how long a cooking
zone was activated. When the "H" or "h" sign disappears, the cooking zone may still be
hot in some cases (power failure, a hot pan left on the cooking zone etc.). Be careful as
there is danger of burning! In case of a power failure while the cooking zones are still hot,
the "H" or "h" sign will flash on the display. This indicates that the cooking zone may or
may not be hot, depending on the duration of the power failure.
The appliance was tested and the factory and the cooking zones were heated up.
Therefore, "H" may flash on the display for a while when the appliance is connected for
the first time at your home.
When the "H" sign disappears, the cooking zone may still be hot. Risk of burns!
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje ECS693ST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje ECS693ST in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info