335433
5
Zoom out
Zoom in
Previous page
1/6
Next page
Instructions for use, mounting and connection
13
Mounting the Built-in Hob
The plywood coating of the kitchen elements should be
processed with temperature resistant adhesives (100°C),
otherwise they may distort or change shape.
The use of decorative trimmings made of solid wood on the
worktop behind the cooking zone is allowed only in case the
minimum distance is as marked on the drawings for
mounting.
Cut out the top panel of the kitchen unit into which the
ceramic glass cooktop is to be built into.
Minimum distance between the built-in cooktop and the rear
wall is marked on the installation drawing.
Protect the edges of the openings, if necessary.
Built-in cooktop may be mounted into 30 - 40 mm thick
working tops.
In case there is a drawer in kitchen cabinet under the built-in
hob, it is necessary to install an additional horizontal barrier
of height 6 cm under the hob and above the drawer.
Mounting dimensions
Worktop should be perfectly levelled.
Respect the instructions shown in Fig. 1 regarding
installation.
Protect the cut edges and openings and insert adequate
packing.
Insert the appliance into the opening.
Push firmly the cooktop plate from above and fix it with four
(4) screws from below. Watch the position of mounting
braces: they may differ for 30 mm and 40 mm worktops (Fig.
2 and 2a).
1 worktop
2 built-in cooktop
3 kitchen unit
4 screw
5 metal brace
Electrical connections
The electric built-in cooker has to be mounted and installed
by a qualified technician. The protection of the electrical
wiring shall comply with current standards and regulations.
Before connecting the appliance to the power source, make
sure that the voltage stated on the rating plate complies with
the voltage of your power supply.
The rating plate of the ceramic glass hob is fixed on the
lower side of the hob.
The cooker shall be connected to 230 V AC.
Electric connections shall be of such design, to incorporate a
protection device between the appliance and the supply, like
fuses or FI switches (to assure at least a 3 mm clearance
between the contacts in open position).
The connection should be made considering the current
capacity of the installation and the fuses.
Fire protection is of class Y, which means that the appliance
may be mounted between two kitchen units; one of them
may be higher than the appliance itself, the other has to be
of the same height.
After mounting, the live parts and insulated parts of the
appliance should be protected against accidental contacts.
The distance between the ceramic glass hob and the hood
should be at least as stated in the instructions for mounting
the hood.
No kitchen furniture drawers are allowed to be mounted
below the glass ceramic cooktop.
1
2
2a
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje ecs 610 e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje ecs 610 e in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info