327680
43
Zoom out
Zoom in
Previous page
1/48
Next page
230779
The appliance can be protected against tipping over using the
supplied angle bracket.
Before installing, we recommend placing the appliance and
levelling it according to your requirements using the adjustable
feet (see chapter Levelling the Appliance and additional support).
Please refer to Figure 2, illustrating the appliance's built-in
dimensions, with angle bracket installed and adjustable feet fully
retracted.
Make sure the angle bracket is placed within the speci ed zone.
Select the starting position for installation and push the
appliance all the way to the wall.
Pull out the appliance drawer.
Use a pencil to mark the middle of the appliance on the wall,
through the opening in the lower part of the appliance. Then,
make another mark 45 to 95 millimetres to the right of the
middle (Figure 2).
Place the shorter end of the angle bracket against the mark on
the wall. The longer end of the bracket should touch the upper
surface of the pro le at the back of the appliance (Figure 1).
Through the holes in the lower part of the appliance, mark the
centres of the three holes with diameter of 5.5 millimetres.
These holes are located on the shorter end of the angle bracket
pressed against the wall (Figure 3).
Pull the appliance out of the starting position. Drill three holes at
the marked spots and insert the supplied plastic wall plugs.
Attach the bracket to the wall with the screws supplied.
Push the appliance to the selected starting position and replace
the drawer.
NOTES:
- The measures in parenthesisare the built-in dimensions of the
angle bracket without the additional support.
- If the screws and wall plugs supplied do not allow attaching the
supplied bracket rmly to your wall to prevent the appliance
from tipping over, use other ttings to attach the angle bracket
in a way that will prevent it from being pulled out of the wall.
Figure 1
Protecting the appliance
from tipping over
Figure 2
Figure 3
43
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje ec 65301 aw at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje ec 65301 aw in the language / languages: English as an attachment in your email.

The manual is 3,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info