604112
28
Zoom out
Zoom in
Previous page
1/48
Next page
EN
DETAILED
INSTRUCTIONS
HOW TO USE YOUR
DRYER
www.gorenje.com
We thank you for the
confidence you have shown us by
purchasing this dryer. Your new
dryer complies with the requirements
of modern laundry care; it will
dry your laundry quickly, leaving
it soft and smooth, while use of
special programs will not deform
it. SensoCare technology will allow
simple operation of the dryer with
very low power consumption.
This appliance is designed exclusively
for household use for clothes which
may be drying in a dryer.
3
TABLE OF CONTENTS
452857
DRYING
STEPS
CLEANING
AND
MAINTANCE
OF THE
APPLIANCE
INTRODUCTION
TROUBLE-
SHOOTING
GETTING
STARTED
OTHER
4 SAFETY PRECAUTIONS
8 APPLIANCE
9 Technical information
10 ControL panel description
12 INSTALLATION AND CONNECTION
12 Selecting the room
15 Installation
16 Condensate discharge
17 Electrical connections
18 Moving and transport
18 Subsequent transport
19 Emptying the steam generator tank
20 Ionizer system
20 Steam generator system
21 BEFORE THE FIRST USE
24 DRYING STEPS (1 - 7)
24 1. Step: Check the tags on your laundry
25 2. Step: Preparing the laundry
28 3. Step: Selecting a program
31 4. Step: Additional functions
32 5. Step: Style
34 6. Step: Program start-up
34 7. Step: End of drying cycle
35 CLEANING AND MAINTENANCE
36 Cleaning the net filter in the door
37 Cleaning the heat pump filter
38 Cleaning the steam generator tank filter
39 Emptying the condensate tank
40 Cleaning the dryer
41 INTERRUPTING AND CHANGING THE PROGRAM
42 What to do...?
44 TIPS AND RECOMMENDATIONS FOR DRYING AND ECONOMIC USE
OF YOUR DRYER
45 DISPOSAL
46 TYPICAL CONSUMPTION TABLE
4
SAFETY PRECAUTIONS
452857
Please don´t use the appliance unless you
have studied and understood the instruction
manual.
Your dryer is intended solely for household
use.
If the dryer is used for professional, for-profit
purpose or purpose exceeding normal use
in a household, or if the dryer is used by a
person who is not a consumer, the warranty
period shall be equal to the shortest warranty
period required by relevant legislation.
Before connecting the dryer to the power
mains, please read carefully the instructions
for use which describe the dryer and its
correct and safe use. The instructions apply
for several appliance types/models; thus,
settings or equipment may be described
herein which is not available in your dryer.
Failure to observe instructions or incorrect
use of the dryer, can lead to damage of
laundry, dryer or the user.
Store the instruction manual nearby the
dryer.
Do not allow the children to play with the
appliance.
Prevent your children and pets to enter the
dryer drum.
Air in the dryer environment should not
contain dust particles.
The air where the dryer is installed, should
be well ventilated to prevent feedback of
gases released from the gas appliances with
open fire (e.g. fireplace).
The dryer back wall can be hot danger of
burns.
Clean the filters after each drying cycle. If
you have removed the filters, replace them
before the next drying cycle.
Always switch off the dryer after use (the
program selector switch should be in the
"OFF" position) and unplug the power cord
from the wall outlet (to prevent the hazard of
lightning or voltage overload).
The dryer employs the heat pump system to
heat the air.
The system consists of a compressor and
heat exchangers.
After running the dryer, compressor
operation, or the sound of flowing liquid,
may be somewhat louder. This is not a sign
of malfunction and it will not affect useful life
of the appliance. In time, dryer operation and
this noise will become more quiet.
Leave any repairs and similar tasks on the
dryer to an expert.
Unprofessional repair may result in an
accident or major malfunction. Call the
authorized service department (see list of
service departments attached).
The warranty does not cover (consumables
(light bulbs), minor deviations in colour,
increased noise which is a consequence of
the appliance age and does not affect the
functionality of the appliance, and aesthetic
defects on components that do not affect
the functionality and safety of the appliance.
5
452857
The appliance is manufactured in
compliance with all effective safety
standards.
Nevertheless, we recommend it is not used
by persons with impaired physical or mental
abilities and motor skills, or persons with
deficient experience or knowledge, without
due supervision. The same recommendation
applies to the use of appliance by minors.
Never stop the drying cycle before it is
completed; if you do interrupt the cycle
for any reason, be careful when removing
the laundry from the drum as it is very hot.
Quickly remove the laundry from the drum
and spread it to allow it to cool down as
quickly as possible.
6
452857
CHILDREN UNDER 3 YEARS SHOULD BE KEPT
AWAY FROM THE MACHINE UNLESS THEY ARE NOT
CONSTANTLY SUPERVISED AT ALL TIMES.
THE APPLIANCE IS MANUFACTURED IN COMPLIANCE
WITH ALL RELEVANT SAFETY STANDARDS.
THIS APPLIANCE CAN BE USED BY CHILDREN
AGED FROM 8 YEARS AND ABOVE AND PERSONS
WITH REDUCED PHYSICAL, SENSORY OR MENTAL
CAPABILITIES OR LACK OF EXPERIENCE AND
KNOWLEDGE IF THEY HAVE BEEN GIVEN SUPERVISION
OR INSTRUCTION CONCERNING USE OF THE APPLIANCE
IN A SAFE WAY AND UNDERSTAND THE HAZARDS
INVOLVED. CHILDREN SHALL NOT PLAY WITH THE
APPLIANCE. CLEANING AND USER MAINTENANCE SHALL
NOT BE MADE BY CHILDREN WITHOUT SUPERVISION.
7
452857
TO REDUCE FIRE HAZARD, PLEASE READ THE
FOLLOWING INSTRUCTIONS:
Do not dry in the dryer any laundry, that has not been
washed earlier.
Use the dryer only to dry laundry that was washed with
water. Do not dry any laundry that was washed of cleaned
with inflammable cleaners or substances (such as gasoline,
trichloroethylene etc.) as this may result in an explosion.
Laundry stained with oil, acetone, alcohol, oil derivatives,
stain removers, turpentine, wax, and wax removers should
be washed in a washing machine with hot water and
detergent before it is dried in the dryer.
Clothing that includes latex, rubber parts, shower and
bathing caps, and laundry or covers with rubber foam
should not be dried in the dryer.
Laundry conditioners or similar products have to be used in
compliance with manufacturer's instructions.
8
APPLIANCE
(DRYER DESCRIPTION)
1
2
3
3
3
3
1
2
3
5
6
7
8
4
452857
FRONT
1 Program selector dial
2 Control panel
3 Condensate tank
4 Door
5 Net filter
6 Heat pump filter
7 Air vent
8 Rating plate
BACK
1 Condensate discharge pipe
2 Power cord
3 Adjustable feet
9
TECHNICAL INFORMATION
(DEPENDING ON THE MODEL)
TYPE: SP10/XXX
Art.No.: XXXXXX
AC 220-240V 50 Hz
Pmax.: XXXXW
10A
MADE IN SLOVENIA
MODEL: XXXXXX
Ser.No.: XXXXXX
RXXXX/450g
X
kg
IPX4
452857
The rating plate with the basic information on the dryer is located under the door frame.
Width
600mm
Height
850mm
Depth
600mm
Depth with door
open
1100mm
Weight
XX/YY kg
(depending on the
model)
Rated voltage
See rating plate
Fuse
See rating plate
Nominal power
See rating plate
Amount of
refrigerant
See rating plate
Type of refrigerant
R134a
Maximum load
See rating plate
The rating plate
10
CONTROL PANEL DESCRIPTION
FOR MODELS: A) IONIZER + STEAM AND B) IONIZER
ST
ART|
PA
US
E
1
43
5
2a
2b
2c
452857
1
START/ PAUSE key,
use this key to start or
stop the program. When
selected, the signal light on
the key will flash. When the
program has started it will
be lit continuously.
2
a , b , c : SIGNAL
LIGHTS are on: when
it is necessary to clean the
filter, empty the condensate
tank or when the child lock
is on.
3
STYLE key
NORMALcare
GENTLEcare (low
temperature)
4
START DELAY key,
to select the delayed
start of the drying program.
5
DISPLAY showing the
DRYING STYLEon the
left
and DELAYED START or
time to the end of the cycle
on the right
A) IONIZER + STEAM
11
90'
30
'
90
'
60
'
30
'
6c
7
6b
6a
6b
6a
6c
7
452857
6
a , b , c : ADDITIONAL
FUNCTION keys, to
extend or adjust the basic
programs.
7
ON/OFF and PROGRAM
SELECTOR dial
MOST USED PROGRAMS
B) IONIZER
12
INSTALLATION AND
CONNECTION
SELECTING THE ROOM
10 cm
10 cm
5 cm
452857
Ventilation slots and the opening on the front and rear side should always be kept free.
Do not install the appliance in a room where there is danger of frost.
The room in which the appliance is installed should be adequately ventilated, with
temperature between 10°C and 25°C. When the dryer is operated at a lower ambient
temperature, condensate can accumulate in the appliance interior. Frozen water in the
condensate tank or pump may damage the dryer.
The surrounding illumination in the installation room should be adequate to read the front
panel properly.
When installing the dryer in a room, note the required clearance as indicated in the image.
In case of failure to heed the required minimum clearance, the dryer may overheat.
13
POSITIONING THE APPLIANCE
4X
452857
Positioning the appliance on top of the washing machine by using the vacuum feets or
side by side.
Dryer can be stand freely on the floor or on a washing machine of the same dimensions
– minimum width 517 mm, minimum depth 476 mm. The surface on which the dryer is
placed should be clean and level.
Use the vacuum feet attached; they are designed to prevent the dryer from sliding.
(Vacuum feet are attached or can be purchased (depending on model))
Washing machine on which you wish to install the dryer must be able to bear the weight
of the dryer (see washing machine's rating plate or technical information).
14
452857
Do not place the dryer behind lockable or sliding door or door
with a hinge opposite the dryer. Install the dryer in such way
that the door can always be freely opened.
Never block the cool air opening (see dryer description).
Drying machine on top should be placed by at least two
persons.
Do not place the dryer on a carpet with long fibres as this may
impede air circulation.
The appliance may not be in contact with a wall or adjacent
furniture.
15
INSTALLATION
452857
Level the dryer in
longitudinal and
traverse direction
by rotating the
adjustable feet
which allow levelling
by +/- 1 cm. Use
key nr. 22 and spirit
level.
Floor on which the machine is placed must have a concrete
base. They must be clean and dry; otherwise, the machine may
slide. Also clean the adjustable feet.
The appliance must stand level and stable on a solid base.
Vibrations, moving of the appliance across the room, or loud
operation due to improperly adjusted feet are not covered by
the warranty.
Sometimes, unusual or loud noise may appear during
appliance operation; these are mostly the result of improper
installation.
16
CONDENSATE DISCHARGE
max 80 cm
452857
The moisture from the laundry is extracted in the condenser unit
and accumulated in the condensate tank.
During the drying process, a control light will warm you of a full
condensate tank which has to be emptied.
Interruption of the drying cycle due to full condensate tank can be
avoided by running the condensate discharge tube found at the
back of the appliance directly into a drain.
If the condensate discharge tube is run into a drain, make sure
the tube is firmly secured. This will prevent any water spillage
which could result in unexpected damage.
In this case, the steam generator tank will not be filled
automatically. It will always require manual filling (see section
Filling and replenishing the steam generator tank).
1
Pull the tube to
remove it with
flat screw-driver,
from the holder on
the appliance back
wall (on the left
hand side under the
cover).
2
Install tube into
the drain, at
a height of 80 cm
from the ground.
17
ELECTRICAL CONNECTIONS
2h
452857
The dryer should be left to stand still for at least two hours
before it is connected to the power mains to allow the system to
stabilize.
Use the power cord to connect the dryer to the power mains
through a power outlet. The dryer may not be connected to the
power mains through an extension cable (danger of overheating
and fire). Nominal voltage and other information is given on the
rating plate located under the door frame.
To prevent from damage by excess voltage on the mains due
to lightning strike we recommend to use a class I over-voltage
protector between the machine and the mains.
After installation, the wall outlet should be freely accessible.
The outlet should be fitted with an earth contact (in
compliance with the relevant regulations).
A damaged power cord may only be replaced by a person
authorized by the manufacturer.
18
SUBSEQUENT TRANSPORT
MOVING AND TRANSPORT
452857
After each drying cycle, a small amount of condensed water
will remain in the pump section. Switch on the appliance and
choose one of the programs, then let the appliance operate for
approximately half a minute. This will pump out the remaining
water and prevent damage to the dryer during transport.
If the appliance was not transported in compliance with the
instructions, the dryer should be left to stand still at least two
hours before it is reconnected to the power mains. Failure
to do so may result in a heat pump failure which shall not be
covered by the warranty.
Be careful not to damage the cooling system.
If the dryer cannot be transported in the upright position, tilt it to the left side.
After transport, the dryer should be left to stand still for at
least two hours before it is connected to the power mains to
allow the system to stabilize. We recommend that installation
and connection should be done by a qualified person.
The belt can be replaced by a servising engineer only, who
incorporates an original spare part with the marking OPTIBELT
8PH 1951, code 454266.
Before connecting the appliance, read the instructions for
use. Repair or any warranty claim resulting from incorrect
connection or use of the appliance shall not be covered by the
warranty.
19
EMPTYING THE STEAM GENERATOR TANK
(ONLY FOR MODEL WITH STEAM GENERATOR)
452857
Before transporting a dryer that has been previously used, the
steam generator tank must also be emptied. Otherwise, water
from the tank may spill into the dryer interior. Move the dryer
approximately 40 cm away from the wall and tilt it backwards.
1
The steam
generator tank
emptying plug is
located on the front
side (lower right
hand side).
2
Place an empty
vessel under the
plug (approximately
2 l) and pull out the
plug
3
When the water
is discharged,
replace the plug
(if the plug is not
replaced, water will
spill from the dryer
during the next
drying cycle).
20
STEAM GENERATOR SYSTEM
(DEPENDING ON THE MODEL)
IONIZER SYSTEM
(CERTAIN MODELS ONLY)
452857
After the end of the drying program, immediately remove the
laundry from the dryer to prevent it from creasing again.
Care and treatment of your laundry with steam.
Use steam to straighten the creases and refresh the laundry. The
laundry will become soft and smooth, making ironing much easier
Ionizer adds negative ions into the dryer drum, which has a
positive effect on the laundry.
The fibre will be flexible and your clothes will be tender and easy
to iron. The process takes place during the drying programs.
22
452857
BEFORE USING THE APPLIANCE FOR THE FIRST
TIME
(MODEL WITH STEAM GENERATOR)
If you select one of the steam programs as the first program to be run with your dryer,
first add distilled water to the steam generator tank; the dryer needs the distilled water to
generate steam.
If the steam generator tank is empty, none of the steam programs will be available.
"LO" (steam generator tank empty) will appear on the display. Later, the system is
automatically filled with condensed water accumulated during the drying process.
Only use distilled water. Do not use regular tap water or any
additives. Limescale may damage the heater. Malfunction or
failure due to accumulation of limescale is not covered by the
warranty.
Add distilled water when the appliance is switched on and one
of the steam programs is selected (but before starting any
drying program). Otherwise, the level sensor will not operate
and water may overflow to the dryer interior.
23
FILLING AND REPLENISHING THE STEAM
GENERATOR TANK
(MODEL WITH STEAM GENERATOR)
452857
By slowly pouring, you will prevent the water from flowing
down the front wall of the appliance. (Steam generator tank is
not visible as it is located in the dryer interior; only the steam
generator tank filter is visible.
When the steam generator tank is full, "FULL" will be displayed
on the screen and an acoustic alarm will be emitted.
1
Remove the
condensate tank.
2
Slowly add
distilled water to
the steam generator
tank filter
1
2
24
DRYING STEPS (1 - 7)
452857
1. STEP: CHECK THE TAGS ON YOUR LAUNDRY
Normal wash
Delicate wash
Max.
washing
95°C
95
95
Max.
washing
60°C
60
60
Max.
washing
40°C
40
40
Max.
washing
30°C
30
30
Manual
washing
Washing
not
allowed
Whitening Whitening in cold water
c1
Whitening not allowed
Dry cleaning Dry cleaning in
all solvents
A
Perchloret-
yhlene R11, R113,
Petrolej
P
Dry cleaning in
kerosene, in pure
alcohol and in
R 113
F
Dry cleaning
not allowed
Ironing Hot iron max.
200°C
Hot iron max.
150°C
Hot iron max.
110°C
Ironing not
allowed
Drying Place on flat
surface
Hang wet
Hang
High temp.
Low temp.
Tumble drying
not allowed
25
2. STEP: PREPARING THE LAUNDRY
452857
1. Sort the laundry by type and thickness of the fabric (see Program Table).
2. Close the buttons and zips, tie any ribbons, and turn the pockets inside out.
3. Place very sensitive clothes in a special-purpose laundry washing bag.
(The special-purpose textile bag is available separately.)
The following types of laundry may not be dried in the dryer
as this may cause your garments to deform:
leather garments and other leather products;
garments that are waxed or treated in any other way;
garments with major wooden, plastic, or metal parts;
garments with spangles;
garments with metal parts subject to rusting.
26
DRYING IN A BASKET (ONLY WITH SOME MODELS)
452857
Prior to first drying remove the basket and any wrappings
from the drum.
Drying in a basket may be selected only at time defined drying.
Mount the basket in the opposite order of the procedure for its
removal, but without the transport packaging.
The basket drying function is used to dry sneakers or other things
which you want to prevent from tumbling within the drum (max.
load: 2,5 kg).
Dry only clean sneakers. Wring them after washing to such extent
that they do not drip water prior inserting into the dryer.
During this function the basket remains still. Be careful to avoid
things which are being dried to touch the drum as they may get
stuck and thus damaged.
27
SWITCHING ON THE DRYER
LOADING THE DRYER
12
452857
Connect the appliance to the power mains by plugging in the
power cord.
To light up the drum (certain models only), rotate the program
selector dial to any position.
Open the dryer door by pressing it on the left side towards the
dryer.
Insert the laundry into the drum (make sure the drum is empty).
Do not insert laundry into the dryer if it has not been wrung or
spun (recommended minimum spinning cycle: 800 rpm).
Close the dryer door.
28
3. STEP: SELECTING A PROGRAM
7
90'
30
'
90
'
60
'
30
'
452857
During operation, the dial will not rotate automatically.
To select a program, rotate the program selector dial to the left or
to the right (according to the type of desired level of dryness of
the laundry).
Model a)
Ionizer + steam
Model b)
Ionizer
29
PROGRAM TABLE
MODEL WITH STEAM GENERATOR
452857
Program
Dryness levels
Max.
load
Laundry Extra functions
Cotton
Ultra
Storage
Standard*
Iron
8 kg/
9 kg
Non-delicate cotton laundry (towels,
terry towels, stockinette, T-shirts,
trousers, kitchen cloths etc.)
• Air ionizer
• Low temperature
• Start delay
• Extra dry
• Anticrease extra
• Steam (only with cotton
– storage dry)
Mix
Storage
Iron
3,5 kg/
3,5 kg
Clothing made of a mixture of fibres
(trousers, T-shirts, suits etc.)
• Air ionizer
• Low temperature
• Start delay
• Extra dry
• Anticrease extra
• Steam (only with mix –
storage dry)
Timed program
Duration:
30´/90´
4 kg/
4 kg
Laundry that needs to be thoroughly
dried, or a small amount of laundry, or
individual garments.
• Air ionizer
• Low temperature
• Start delay
• Anticrease extra
Bedlinen
5 kg/
5 kg
Larger pieces of laundry (bedding, large
tablecloths, large towels etc.) – prevents
the laundry from forming into a bulk.
• Air ionizer
• Low temperature
• Start delay
• Extra dry
• Anticrease extra
• Steam
Refresh steam
2 kg/
2 kg
Clothing that you wish to treat with
steam (seasonal clothing, preparing the
laundry for easier ironing etc.)
• Start delay
Wool softening
2 kg/
2 kg
Wool garments and garments with
mixed fibres containing wool, which you
wish to soften (sweaters, scarves, shawls
etc.)
Shirts
2 kg/
2 kg
Shirts and blouses • Air ionizer
• Low temperature
• Start delay
• Extra dry
• Anticrease extra
• Steam
Synthetics
Dry
Ultra
3,5 kg/
3,5 kg
Garments made of or containing with
synthetic fibres (T-shirts, trousers, suits,
socks and stockings, gowns etc.)
• Air ionizer
• Low temperature
• Start delay
• Extra dry
• Anti-crease
• Steam (only for
synthetics – ultra)
Sensitive
2 kg/
2 kg
Laundry that requires drying at lower
temperatures (blouses, delicate
underwear, shirts with additional décor
etc.) - Use of special-purpose laundry
washing bag is recommended.
• Start delay
• Extra dry
* Testing program according to the EN61121 standard
30
452857
PROGRAM TABLE
MODEL WITHOUT STEAM GENERATOR
Program
Dryness levels
Max.
load
Laundry Extra functions
Cotton
Ultra
Storage
Standard*
Iron
8 kg/
9 kg
Non-delicate cotton laundry (towels,
terry towels, stockinette, T-shirts,
trousers, kitchen cloths etc.)
• Air ionizer
• Low temperature
• Start delay
• Extra dry
• Anticrease extra
Mix
Storage
Iron
3,5 kg/
3,5 kg
Clothing made of a mixture of fibres
(trousers, T-shirts, suits etc.)
• Air ionizer
• Low temperature
• Start delay
• Extra dry
• Anticrease extra
Timed program
Duration:
30´/60´/90´
4 kg/
4 kg
Laundry that needs to be thoroughly
dried, or a small amount of laundry,
or individual garments.
• Low temperature
• Start delay
• Anti-crease
• Venting
Bedlinen
5 kg/
5 kg
Larger pieces of laundry (bedding,
large tablecloths, large towels etc.)
• Air ionizer
• Low temperature
• Start delay
• Extra dry
• Anticrease extra
Wool softening
2 kg/
2 kg
Wool garments and garments
with mixed fibres containing wool
(sweaters, scarves, shawls etc.)
Shirts
2 kg/
2 kg
Shirts and blouses • Air ionizer
• Low temperature
• Start delay
• Extra dry
• Anticrease extra
Synthetics
Dry
Ultra
3,5 kg/
3,5 kg
Garments made of or containing
with synthetic fibres (T-shirts,
trousers, suits, socks and stockings,
gowns etc.)
• Air ionizer
• Low temperature
• Start delay
• Extra dry
• Anticrease extra
Sensitive
2 kg/
2 kg
Laundry that requires drying at
lower temperatures (blouses,
delicate underwear, shirts with
additional décor etc.) - Use of
special-purpose laundry washing
bag is recommended.
• Start delay
• Extra dry
• Anticrease extra
• Venting
* Testing program according to the EN61121 standard
32
5. STEP: STYLE
3 4
5
452857
Selecting the drying style (drying temperature)
NORM (Normal drying – default setting)
GENT (Low drying temperature)
Start delay
Use this function to start the drying cycle after a certain amount of
time has elapsed.
Delay time can be set to up to five hours in 30-minute steps and
up to 24 hours in 1-hour steps.
The function is activated when the START/PAUSE key is pressed.
Time is counted down by minutes. When the countdown reaches
zero, the selected drying program will start automatically.
To interrupt or change the program delay time press the START/
PAUSE key. Press the (4) key to select a new delay time. To
confirm the new setting, press the START/PAUSE key.
To quickly cancel the delayed start setting, press the (4) key and
hold it for 3 seconds.
In case of a power supply failure before the delay time has elapsed,
press the START/PAUSE key to resume the countdown.
3
4
Some functions cannot be selected with some programs; an
acoustic signal and a flashing light will remind you of such
cases (see Program Table).
33
452857
After disconnecting the appliance from the power mains, all
settings will be reset to their default factory values, except for
the contrast setting, acoustic signal setting, anti-crease feature,
and the child lock setting.
SOUND SIGNAL LEVEL
Select the acoustic signal loudness by simultaneously pressing a key (6a) and rotating the
program selector dial (7) clockwise to the initial position.
Each time the key (6a) is pressed, the final loudness level is changed (three levels).
Loudness level is indicated on the display unit. The most recent setting is stored.
SETTING THE CONTRAST LEVEL
To select the contrast level on the display, simultaneously press the (3) key and rotate the
program selector dial (7) clockwise to the initial position.
Each time you press the (3) (–) or (4) (+) key, the level of contrast on the display unit
is changed (9 levels; press (3) to decrease the level, press (4) to increase). Contrast
level is indicated on the display unit. The most recently selected contrast level is stored
automatically after 5 seconds, or after you press the (6b) key.
STANDBY MODE
If no program is selected and started and no other action is taken within five minutes after
turning on the machine, the display will be automatically turned off to save energy. Signal light
on the START/PAUSE key will flash.
The display will turn on again when you rotate the program selector dial or press any button.
If no action is taken after the end of the program, the display will also be turned off after five
minutes. Signal light on the START/PAUSE key will flash.
P o = weighted power in ‘off mode’ [W] 0,09
P I = weighted power in the ‘left on mode’ [W] 0,5
T I = time in ‘left on mode’ [min] 10,0
As a result of low mains voltage or different laundry loads,
drying time can change. This is regularly updated on the
display.
34
452857
6. STEP: PROGRAM START-UP
Press the START/PAUSE key.
Selected drying style and start delay (if selected), or the time
remaining until the end of the program and counting down will
be indicated on the display unit. Signal lights next to the selected
functions will be lit.
7. STEP: END OF DRYING CYCLE
An acoustic signal will indicate the end of the drying cycle. Signal
lights will light up and the light on the START/PAUSE key will flash.
1. Open the dryer door.
2. Clean the filters (see section Cleaning ...).
3. Take the laundry from the drum.
4. Close the door!
5. Switch off the appliance (rotate the program selector dial to
the "OFF" position).
6. Empty the condensate tank.
7. Unplug the power cord from the outlet.
Drying time indicated is based on tests according to the
EN 61121 standard and it may change in steps during the
drying process, depending on the load and initial moisture of
thelaundry.
37
CLEANING THE HEAT PUMP FILTER
452857
Place an absorbent cloth on the floor in front of the dryer (possible
water spill).
1
Open the outer
cover (hold
the handle on the
left side and pull
downwards.
2
Use the handle
to remove the
heat pump foam
filter.
3
Remove the
heat pump foam
filter from its handle.
Use a damp cloth to
clean the heat pump
housing. Be careful
not to damage the
cooling system.
4
Wash the filter
under running
water. Dry the filter
before replacing it.
Insert the heat pump foam filter back (which is placed inside
of dryer) (make sure the filter is inserted correctly into the
support bed; otherwise, heat exchanger may be clogged).
Close the exterior cover (push it upwards towards the
appliance until it snaps back into place). Clean the foam filter
at least after every five drying cycles.
38
CLEANING THE STEAM GENERATOR TANK
FILTER
(MODEL WITH STEAM GENERATOR)
452857
Each time you empty the condensate tank, clean the steam
generator tank filter as well.
The filter is located in the tank housing (visible when the
condensate tank is removed).
1
Remove the
condensate tank.
2
Remove the
filter from the
support bed in the
condensate tank
housing.
3
Clean the filter
thoroughly
under running water.
If necessary, clean
the filter support
bed as well.
Make sure the remains of the fibres accumulated during
operation do not enter the dryer as this may clog the system).
Insert the filter correctly back into the support bed (otherwise,
the filter will not perform its function, which may result in
clogging of the system)
40
CLEANING THE DRYER
452857
Wipe the dryer exterior using a damp cloth and mild detergent.
Do not use detergents or cleaners that could damage the dryer (heed the
recommendations and warnings by the cleaner/detergent manufacturers).
Use a soft cloth to wipe dry all parts of the dryer.
Always disconnect the dryer from the power mains before
cleaning.
Additional equipment and facilities for maintenance can be seen on: www.gorenje.com
41
INTERRUPTING AND CHANGING
THE PROGRAM
452857
INTERRUPTIONS
Interrupting the program process
Press the START/PAUSE key to pause/
resume and the program.
Open door
If the dryer door is opened during the
drying process, the drying cycle will be
interrupted.
When the door is closed and the START/
PAUSE key is pressed, the drying will
resume from the point at which it was
interrupted.
Full condensate tank
When the condensate tank is full, the drying
program will be interrupted (signal light 2b
will flash).
Empty the condensate tank (see section
Cleaning and Maintenance).
Press the START/PAUSE key to resume the
drying cycle from the point at which it was
interrupted.
Power supply failure
When power supply is resumed, the signal
light on the START/PAUSE key will flash.
To resume the drying process, press the
START/PAUSE key.
CHANGING THE PROGRAM/
FUNCTIONS
Press the START/PAUSE key and rotate the
program selector dial to the "OFF" position.
Select another program/function and press
the START/PAUSE key again.
SAVING PERSONAL SETTINGS
Initial settings may be changed. When
the program and additional functions are
selected, you may store such combination
by pressing the START/ PAUSE key and
holding it for five seconds.
A signal light on the START/PAUSE key
and an acoustic signal will confirm your
selection. "SET CHD" (settings changed)
will appear briefly on the display; then, the
selected setting will be displayed.
Press the START/PAUSE key to start the
drying process.
The changed combination will appear every
time you switch on the dryer.
Use the same procedure to change an
already saved combination.
42
WHAT TO DO...?
452857
Disturbances from the environment (e.g.
the power grid) may result in various error
reports (see Table on the next page).
In such case:
switch off the appliance and wait at
least one minute;
switch on the appliance and restart the
drying program.
If the error persists, call an authorized
service unit.
You will be able to solve most of
the problems in dryer operation by
yourself.
Repairs may only be carried out by an
adequately trained person.
Repair or any warranty claim resulting
from incorrect connection or use of
the dryer shall not be covered by the
warranty. In such cases, the costs of
repair shall be charged to the user.
The warranty does not cover the errors or failures resulting
from disturbances from the environment (lightning strike,
power grid failures, natural disasters etc.).
43
452857
Problem/error Cause What to do ...?
The dryer does not work. • No voltage in the power
outlet
• Check if the power cord plug
is correctly inserted into the
power outlet.
• Check the fuse.
There is voltage in the
outlet, but the drum
does not spin and the
dryer does not work.
• Program was not started
in accordance with the
instructions.
• The door is not properly
closed.
• Condensate tank is full.
• Delayed start function has
been selected.
• Reread the instructions for use
again.
• Push the door towards the
appliance.
• Empty the condensate tank
(see section Cleaning and
Maintenance).
• Wait until the time indicated on
the display elapses.
Laundry is not dried, or
drying temperature is
longer than 4h.
• Filters are not clean. The
room is not sufficiently
ventilated.
• Inappropriate temperature
in the room
• Laundry was not sufficiently
wrung or spun.
• Amount of laundry dried in
the appliance is too large or
insufficient.
• Clean the filters.
• Install the dryer in an
appropriate room (see section
Installation ...)
• Check if the temperature in
the room where the dryer is
installed is too high (over 25°C)
or too low (below 10°C).
• Laundry inserted into the dryer
was not sufficiently wrung or
spun, or an inappropriate drying
program was selected.
• Use an appropriate program or
use the timed program. Increase
the final level of dryness for the
selected program (intensive
drying function).
Unevenly dried laundry. • The amount of laundry
dried at a time is too large.
• Drying the pieces of
different thicknesses
• Drying the different types
of laundry
• Make sure the laundry is sorted
by type and size of items given
the selected program (see
section Drying – Preparing
the Laundry and the Program
Table).
Error in the drum
lighting.
• There is no lighting when
the dryer door is opened.
• Disconnect the dryer from
the power mains and call an
authorized service unit.
On display: F3 • Full condensate tank
• If the condensate tank is
empty, there is a pump
failure.
• Empty the condensate tank
(see section Cleaning and
Maintenance).
• Disconnect the appliance and
call the nearest service unit.
On display:F4 • Clogged filters
• If the filters are clean,
there may be a compressor
failure.
• Clean the filters.
• Disconnect the appliance and
call the nearest service unit.
On display:"LO" • Steam generator tank is
empty
• Add distilled water
Write down the failure/error code: F0, F1, or F2, disconnect the appliance and call the
nearest authorized service (call center).
44
TIPS AND RECOMMENDATIONS
FOR DRYING AND ECONOMIC
USE OF YOUR DRYER
452857
The most economical way of drying is to dry the recommended
amount of laundry in each batch (see Program Table).
Drying laundry made of particularly delicate fabrics that may be
deformed is not recommended.
Use of conditioner in the washing cycle is not necessary as the
laundry is soft and smooth after drying in the dryer. Drying
time will be shorter and power consumption will be lower if the
garments are thoroughly wrung or spun before drying. By selecting
the appropriate drying program, you will avoid overdrying your
laundry and problems with ironing or shrinkage of fabric.
Regular cleaning of the filters will lead to optimum drying time and
minimum power consumption.
When drying smaller amounts of laundry or individual garments,
the sensor may not perceive the actual level of moisture in the
laundry. In such cases, it is recommended to dry smaller items
or amounts with programs for dryer laundry or with the timed
program.
45
DISPOSAL
452857
Packaging is made of environmentally friendly materials that can
be recycled, disposed of, or destroyed without any hazard to
the environment. To this end, packaging materials are labelled
appropriately.
The symbol on the product or its packaging indicates that the
product should not be treated as normal household waste. The
product should be taken to an authorized collection center for
waste electric and electronic equipment processing.
When disposing of an obsolete appliance, make sure you remove
the power cord and destroy the door switch and latch to prevent
the door from closing (children safety).
Disposing the product in the correct manner will help prevent
any negative consequences and effects on the environment and
human health which could occur in case of inappropriate product
disposal. For detailed information on disposal and processing of
the product, contact your relevant municipal authorities in charge
of waste management, waste management service, or the store at
which you bought the product.
46
TYPICAL CONSUMPTION TABLE
452857
Due to deviations in terms of type and amount of laundry, spinning,
power supply oscillation, and environment temperature and
humidity, the values measured at the user may differ from the one
stated in the table.
The table lists the values for remaining moisture, drying time and
power consumption for drying of a test batch of laundry with
various spinning rpm in the washing machine (with the 'Cottons
Standard' program selected).
SPK A Residual moisture
[l]
Drying time
[min]
Electricity
consumption [kWh]
A+++
[RPM]
8 kg 9 kg % 8 kg 9 kg 8 kg 9 kg
800 5,0 5,6 62 165 195 1,52 1,69
1000 4,7 5,3 59 150 175 1,40 1,54
1200 4,2 4,8 53 145 170 1,30 1,41
1400 3,5 4,0 44 135 167 1,19 1,37
1600 3,4 3,9 43 122 162 1,08 1,30
(measured by standard EN 61121)
Standard programs for cotton laundry in compliance with the currently effective
regulation EU 392/2012
Program Amount of laundry
Max./half load
[kg]
Program duration
[min]
Electricity
consumption
[kWh]
Cotton standard
8 / 4 150 / 86 1,40 / 0,86
Cotton standard
9 / 4,5 175 / 106 1,54 / 0,89
The Cotton Standard program
is intended for drying of normally wet cotton laundry. It is the
most efficient program for drying cotton laundry in terms of power consumption.
We reserve the right to any changes and errors in the instructions for use.
SP10 EXCL HP A+++ en (07-15)
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje D98F66 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje D98F66 in the language / languages: English as an attachment in your email.

The manual is 3,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gorenje D98F66

Gorenje D98F66 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info