728564
19
Zoom out
Zoom in
Previous page
1/40
Next page
19
696856
Cooking time can be set separately for each cooking zone. If several timer functions
are activated, the remaining times of respective cooking zones will alternate on the
display unit in intervals lasting a few seconds. A flashing indicator light will indicate the
relevant cooking zone.
Changing the cooking time
- Remaining cooking time can be changed at any time during cooking.
- Touch the power-o timer key (D) to select the timer display for the desired cooking
zone. The relevant indicator light (K) will fl ash.
- Touch the »+« (N) and »–« (M) keys to set the new cooking time.
Displaying the remaining cooking time
If several timer settings are activated, remaining cooking time can be displayed by
touching the (D) key.
Timer reset
- Select the desired timer display by pressing the (D) key (see section Changing the set
cooking time). The set timer will be displayed and the indicator light for the relevant
cooking zone will light up.
- Touch the »–« (M) key to set the value to »00«, or press the »+« (N) and »–« (M) key
simultaneously to immediately reset the value to »00«.
PAUSING THE COOKING PROCESS WITH
STOP & GO
The STOP&GO function allows you to pause (or suspend) the cooking process, but keep
all your settings.
To pause the cooking process, touch the STOP&GO key (C). An indicator light (C1) will
light up above the key. Settings on the displays will start to flash. All settings are frozen,
and the cooking zone are not heated (the heaters are switched off).
All keys except on/off and STOP&GO are inactive. To deactivate the STOP&GO
function, touch the STOP&GO key again. Indicator light (C1) will switch off.
If the STOP&GO function is not switched off, the entire hob will automatically switch off
after 10 minutes.
MEMORY FUNCTION
The memory function allows restoring the most recently selected settings in 5 seconds
after the hob is switched off. This is convenient when, for example, you accidentally
press the on/off key and switch off the entire hob, or if the cooking hob is switched off
automatically due to some spilt liquid.
After switching off with the on/off key, you have 5 seconds to switch the control panel
back on, and further 5 seconds to press the STOP& GO key to restore your settings.
During these 5 seconds, the indicator light above the settings restore key will flash.
All settings active before the hob was switched off will be restored.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje CT41SC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje CT41SC in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info