479813

Gorenje BOC 6322 AX Manual

79
Zoom out
Zoom in
Previous page
1/768
Next page
43
ERROR CODES TABLE
The electronic system continually performs a series of diagnostic tests. If some parameters are incorrect, the control
unit deactivates the functions and displays an error code (Err followed by three numerical digits); all the heating
elements are turned off, including the fan inside the cooking chamber. The cooling fan remains on.
Take note of the error code and contact an Authorized Service Centre, specifying the error code.
Error Code Cause SOLUTION
BOILER overheat
The causes of this alarm are:
The fill pump does not pour the water from
the pitcher to the boiler.
The causes may be:
a – empty pitcher
b – a leak in the hydraulic circuit
c – broken pump
d – electronic failure in the power circuit
(relay or relay control)
Check that there is water in the pitcher.
Turn the oven off and on again.
If the failure repeats, take note of the
error code and contact an Authorized
Service Centre, specifying the error
code.
Boiler protection alarm.
The system de-energizes the GEN. relay in
advance, and thus all the loads connected
to it.
- Replace the power card
Take note of the error code and contact
an Authorized Service Centre,
specifying the code.
Power card overheat: threshold value
>=85°
Check whether the oven is embedded
in the furniture according to the
instructions in this handbook.
Check whether the tangential fan is
operating correctly.
PT1000 cooking chamber sensor
Cause: interruption or short circuit of the
sensor or cables.
- Replace the PT1000
Contact an Authorized Service Centre,
specifying the code.
Food sensor
Cause: interruption or short circuit of the
sensor or cables.
- Check the electrical connections.
- Replace the food probe.
Contact an Authorized Service Centre,
specifying the code.
Boiler thermocouple failure Cause: open
circuit or short to earth.
- Replace the BOILER.
Contact an Authorized Service Centre,
specifying the code.
Cooking chamber steam presence
thermocouple failure Cause: open circuit
or short to earth.
- Replace the TC1.
Contact an Authorized Service Centre,
specifying the code.
Cooking chamber overheat
- Replace the power card
Contact an Authorized Service Centre,
specifying the code.
Failure of the ntc sensor on the power card
Cause: open circuit or short.
- Replace the power card
Contact an Authorized Service Centre,
specifying the code.
77
77
… 79 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje BOC 6322 AX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje BOC 6322 AX in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info