729172
26
Zoom out
Zoom in
Previous page
1/91
Next page
26
Start/stop
Use the button to start and stop the select baking program.
To start a program, press the “START/STOP” button and hold it for approx. 3 seconds. You will hear
short beep and the two dots in the time display will begin to flash. After the program starts, only
SART/STOP, LIGHT LAMP and PAUSE buttons remain active.
To stop the program, press the “START/STOP” button and hold it for approx. 3 seconds, then you will
hear a beep, which means that the program has been stopped.
Menu
It is used to set different programs. Every time you press MENU button, the program will change
(followed by a short beep). Press the button continuously and 12 menus will appear on the LCD
display. Select your desired program. The functions of 12 menus are explained below.
1. Basic: kneading, rising and baking normal bread. You may also add ingredients to increase
flavour.
2. Whole wheat: kneading, rising and baking of whole wheat bread. It is not recommended to use
the delay function as this can produce poor results.
3. French: kneading, rising and baking with a longer rise time. The bread baked in this menu will
have a crisper crust and loose texture.
4. Quick: kneading, rising and baking loaf with a longer time. The bread baked in this menu will
have a crisper crust.
5. Sweet: kneading, rise and baking sweet bread. You may also add ingredients to add flavour.
6. Cake: kneading, rising and baking, rising with soda or baking powder.
7. Jam: cooking jams and marmalades. Fruit or vegetables must be chopped before putting it into
the baking tray.
8. Dough: kneading and rising, but without baking. Remove the dough and make bread rolls, pizza,
steamed bread, etc.
9. Ultra fast: kneading, rising and baking loaf in a short time. The result is a dense texture.
10. Bake: only baking, no kneading and rising. Also used for increasing the baking time on selected
settings.
11. Dessert: kneading, rising and baking dessert.
12. Home made: this program allows you to set programs manually (kneading, rising, baking, keep
warm).
The time range of each program as following:
KNEAD1: 6-14 minutes
RISE1: 20-60 minutes
KNEAD2: 5-20 minutes
RISE2: 5-120 minutes
RISE3: 0-120 minutes
BAKE: 0-80 minutes
KEEP WARM: 0-60 minutes
Under the menu of Home Made,
a) With MENU button choose program HOME MADE. You will hear a short beep after each next
press.
b) Press CYCLE button once, KNEAD1 will appear on LCD, then press TIME button to adjust the
minutes, and press CYCLE again to confirm.
c) Press CYCLE button for the next step, RISE1 will appear on LCD, then press TIME button to
adjust the time. By holding TIME, the number will increase rapidly. Press CYCLE button to
confirm.
d) In such way set the remaining steps. When you set all steps, press START/STOP button to exit
the setting.
e) Press START/STOP button again to activate the operation.
Note: the setting can be memorized and can be used for in next use.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje BM900ND at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje BM900ND in the language / languages: English, Polish as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info