728928
20
Zoom out
Zoom in
Previous page
1/66
Next page
19
How to Use
1. Mount the Measuring Cup (1) onto the Lid (2).
Secure the Lid onto blender jug and press
down ( FIG 1)
2. Place the blender jug on the Main body and
rotate anticlockwise (figure 2). See also
chapter ‘ Safety locking system’.
3. Remove the lid or the measuring cup from the
blender jug and place ingredients into the jug.
4. Place the lid with the measuring cap back onto
the blender jug and rotate the blender
anticlockwise to lock. See also chapter ‘Safety
locking system’. Do not exceed the maximum
indicated level-1.5 litres.
5. Using the selector control knob, select the
desired blending speed1, 2 ,3 or PULSE.
6. The PULSE function remains on as long as the
PULSE button is pressed down, for greater
control when blending, e.g. when chopping
nuts or chocolates, or crushing ice.
7. Setting 1,2 and 3 will provide continuous
blending until the control knob is turned to the
‘0’ position.
8. You can add further ingredients while blending.
For this, remove the measuring cup from the
pouring hole.
9. After you have completed blending, turn the
control knob to the ‘0’ position.
Safety locking system
With safety in mind, this blender and coffee mill are
designed with a safety locking system. Unless the
lid and blending jug or coffee mill are positioned
correctly and locked in place, the blender or coffee
mill will not operate.
For correctly assembling the blender, operate as
follows:
1. Place the main body on the table, with the front
facing toward you.
2. Place the blending jug onto the main body with
the handle to the right. The jug is placed correctly
when the arrow on the jug is positioned right
above the open lock on the motor base.
3. Turn the blending jug to the right until you hear a
slight click. The arrows on the motor base and
blending jug should now be aligned with each
other. If this is the case, the blending jug is locked
correctly.
4. Position the lid onto the blender so that the long
holding lip is facing toward you.
5. Turn this holding lip to the right, so that is it
positioned right on top of the jug handle. Now the
blender is ready for use.
For correctly assembling the coffee mill, operate as
follows:
1. Place the main body on the table, with the front
facing toward you.
2. Place the coffee mill onto the main body, turn the
coffee mill to the right until you hear a slight click.
The arrows on the motor base and the milling
bowl should now be aligned with each other. If
this is the case, the coffee mill is locked
correctly.
3. Now the coffee mill is ready for use.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje B600BP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje B600BP in the language / languages: English, German, Italian, Polish as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info